The IESG has received a request from the Multiprotocol Label Switching WG (mpls) to consider the following document: - 'Encapsulation of Simple Two-Way Active Measurement Protocol for LSPs and Pseudowires in MPLS Networks' <draft-ietf-mpls-stamp-pw-06.txt> as Proposed Standard
The IESG plans to make a decision in the next few weeks, and solicits final comments on this action. Please send substantive comments to the [email protected] mailing lists by 2026-08-11. Exceptionally, comments may be sent to [email protected] instead. In either case, please retain the beginning of the Subject line to allow automated sorting. Abstract This document describes the procedure for encapsulating the Simple Two-Way Active Measurement Protocol (STAMP), defined in RFC 8762, and its optional extensions defined in RFC 8972, in MPLS networks. Label Switched Paths (LSPs) and Pseudowires (PWs) are used in MPLS networks for various services including carrying Layer 2 and Layer 3 data packets and may optionally carry Control Word (CW). The procedure is also described for encapsulating STAMP test packets with or without the use of an IP/UDP header or CW for the LSPs and PWs. The file can be obtained via https://datatracker.ietf.org/doc/draft-ietf-mpls-stamp-pw/ No IPR declarations have been submitted directly on this I-D. _______________________________________________ IETF-Announce mailing list -- [email protected] To unsubscribe send an email to [email protected]
