The IESG has approved the following document: - 'Encapsulation of Simple Two-Way Active Measurement Protocol for LSPs and Pseudowires in MPLS Networks' (draft-ietf-mpls-stamp-pw-21.txt) as Proposed Standard
This document is the product of the Multiprotocol Label Switching Working Group. The IESG contact persons are Gunter Van de Velde, Jim Guichard and Ketan Talaulikar. A URL of this Internet-Draft is: https://datatracker.ietf.org/doc/draft-ietf-mpls-stamp-pw/ Technical Summary This document describes the procedure for encapsulating the Simple Two-Way Active Measurement Protocol (STAMP), defined in RFC 8762, and its optional extensions defined in RFC 8972, in MPLS networks. Label Switched Paths (LSPs) and Pseudowires (PWs) are used in MPLS networks for various services including carrying Layer 2 and Layer 3 data packets and may optionally carry Control Word (CW). The procedure is also described for encapsulating STAMP test packets with or without the use of an IP/UDP header or CW for the LSPs and PWs. Working Group Summary As noted in the shepherd report all outstanding issues have been resolved by the WG. Document Quality There are no known implementations as noted in the shepherds report. Personnel The Document Shepherd for this document is Tony Li. The Responsible Area Director is Jim Guichard. _______________________________________________ IETF-Announce mailing list -- [email protected] To unsubscribe send an email to [email protected]
