Alessandro -

Thanks for the comments.  Will incorporate in next rev.

...George


On 7/6/11 4:16 AM, "D'Alessandro Alessandro Gerardo"
<[email protected]> wrote:

> Dear all,
> I have the following comments:
> 
> Sect 7: " A maintenance point is either a Maintenance
> Entity Group End-point (MEP) or a Maintenance Entity Group
> Intermediate Point (MIP). Maintenance points are uniquely associated
> with a MEG."
>> This is true for MEP. MIP, as currently defined, are not uniquely associated
>> with a MEG.
> 
> Sec 7.4 " At a cross-connect point, in order to automatically generate MIP_IDs
> for MPLS-TP, we simply use the IF_IDs of the two interfaces which are
> cross-connected"
>> the above given definition refers to "intermediate node". It should be
>> extended to cover also the case of "end nodes" because MIPs could be located
>> in such nodes when per-interface MEPs model is applied (e.g.
>> draft-ietf-mpls-tp-oam-framework and Yoshinori's contributions)
>> a reference to sect 4, where IF_ID are defined, should be added
> 
> Best regards,
> Alessandro
> ------------------------------------------------------------------
> Telecom Italia
> Alessandro D'Alessandro
> Transport Innovation
> Via Reiss Romoli, 274 - 10148 Torino
> phone:  +39 011 228 5887
> mobile: +39 335 766 9607
> fax: +39 06 418 639 07
> 
> 
> -----Messaggio originale-----
> Da: [email protected] [mailto:[email protected]] Per conto di The IESG
> Inviato: martedì 28 giugno 2011 00:16
> A: IETF-Announce
> Cc: [email protected]
> Oggetto: [mpls] Last Call: <draft-ietf-mpls-tp-identifiers-06.txt> (MPLS-TP
> Identifiers) to Proposed Standard
> 
> 
> The IESG has received a request from the Multiprotocol Label Switching WG
> (mpls) to consider the following document:
> - 'MPLS-TP Identifiers'
>   <draft-ietf-mpls-tp-identifiers-06.txt> as a Proposed Standard
> 
> The IESG plans to make a decision in the next few weeks, and solicits final
> comments on this action. Please send substantive comments to the [email protected]
> mailing lists by 2011-07-11. Exceptionally, comments may be sent to
> [email protected] instead. In either case, please retain the beginning of the
> Subject line to allow automated sorting.
> 
> Abstract
> 
>    This document specifies an initial set of identifiers to be used in
>    the Transport Profile of Multiprotocol Label Switching (MPLS-TP).
>    The MPLS-TP requirements (RFC 5654) require that the elements and
>    objects in an MPLS-TP environment are able to be configured and
>    managed without a control plane.  In such an environment many
>    conventions for defining identifiers are possible.  This document
>    defines identifiers for MPLS-TP management and OAM functions suitable
>    to IP/MPLS conventions.
> 
>    This document is a product of a joint Internet Engineering Task Force
>    (IETF) / International Telecommunication Union Telecommunication
>    Standardization Sector (ITU-T) effort to include an MPLS Transport
>    Profile within the IETF MPLS and Pseudowire Emulation Edge-to-Edge
>    (PWE3) architectures to support the capabilities and functionalities
>    of a packet transport network as defined by the ITU-T.
> 
> 
> The file can be obtained via
> http://datatracker.ietf.org/doc/draft-ietf-mpls-tp-identifiers/
> 
> IESG discussion can be tracked via
> http://datatracker.ietf.org/doc/draft-ietf-mpls-tp-identifiers/
> 
> 
> No IPR declarations have been submitted directly on this I-D.
> 
> 
> _______________________________________________
> mpls mailing list
> [email protected]
> https://www.ietf.org/mailman/listinfo/mpls
> 
> Questo messaggio e i suoi allegati sono indirizzati esclusivamente alle
> persone indicate. La diffusione, copia o qualsiasi altra azione derivante
> dalla conoscenza di queste informazioni sono rigorosamente vietate. Qualora
> abbiate ricevuto questo documento per errore siete cortesemente pregati di
> darne immediata comunicazione al mittente e di provvedere alla sua
> distruzione, Grazie.
> 
> This e-mail and any attachments is confidential and may contain privileged
> information intended for the addressee(s) only. Dissemination, copying,
> printing or use by anybody else is unauthorised. If you are not the intended
> recipient, please delete this message and any attachments and advise the
> sender by return e-mail, Thanks.
> 
> _______________________________________________
> Ietf mailing list
> [email protected]
> https://www.ietf.org/mailman/listinfo/ietf

_______________________________________________
Ietf mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/ietf

Reply via email to