Also, for anyone who just wants to see the difference in the two data sets I've attached a figure.
George On Thu, May 12, 2011 at 1:23 PM, George Sterbinsky < georgesterbin...@u.northwestern.edu> wrote: > Hello, > > I've noticed an odd behavior in Athena and Artemis and I was hoping someone > could explain it to me. > > I've attached an Artemis file Data3.apj and an Athena file Data4.prj. > > First open Data3.apj. Then from the Artemis file menu choose open, then > open Data4.prj and import the Data4.xmu file. Now plot the data in k-space > you will see a slight difference between the two spectra, most noticeably > above 15 k, so plotting in k^3 is best to see the difference. > > Now close Artemis and don't save. Open Data4.prj with athena and choose to > import only the file Data4.xmu. Save the project as something else. I saved > as Data4C.prj, which I have also attached. > > Close Athena and don't save. Open Data3.apj again. Then from the Artemis > file menu choose open, then open Data4C.prj or whatever you may have named > the file and import the Data4.xmu file, which should now be the only data > file in the project. Now plot the data in k-space and you will find that the > two data sets are now the same. The differences at high k are no longer > present. Can anyone explain what is going on here? > > Thank you, > George >
DataDiff.pdf
Description: Adobe PDF document
_______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit