Hi,Jason!
I think you are really professional and pointed out the most important point at
the beginning !
Actually I am really worried about my experiment too, I also have a doubt about
whether I can see C or O contributions to the EXAFS in my sample.But I think
maybe no one can give the answer for sure. So at least I need to try first and
see. Actually the originality of my work is to study the electrochemical
reduction of CO2 on metal electrodes. Since CO is noticed as an important
adsorbed intermediate in the multistep reaction and only copper has been found
to be unique among the metals in its ability to produce a high quantities of
hydrocarbon fuels, i start to first investigate the interaction between
adsorbed CO and copper.Thats why I believe that using EXAFS to study the
chemisorbed CO gas-copper system will contribute to some reasonable explanation.
I sent you two references, in the first one there is evidence for CO adsorbed
Ru taken at Ru k-edge,where CO is observed in EXAFS, and the second one SEXAFS
study on CO adsorbed on Cu, but it is taken at oxygen K edge.I think even if
there is not exact the same evidence with my system which is EXAFS on Cu k-edge
of CO adsorbed Cu, but it may still work. Why do you think my experiment is not
promising? Could you please explain some reasons to me? Is there any conditions
for metal and adsorbed gas that their EXAFS signal can be detected? If there
are,would you please to give me some modification of my experiment?
Thanks a million.
Best Regards,
------------ Original Message ------------
From : ifeffit-requ...@millenia.cars.aps.anl.gov
To : ifeffit@millenia.cars.aps.anl.gov
Mail Subject : Ifeffit Digest, Vol 115, Issue 2
Sent : Wed, 05 Sep 2012 08:25:57 -0500
Send Ifeffit mailing list submissions to
ifeffit@millenia.cars.aps.anl.gov
To subscribe or unsubscribe via the World Wide Web, visit
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
or, via email, send a message with subject or body 'help' to
ifeffit-requ...@millenia.cars.aps.anl.gov
You can reach the person managing the list at
ifeffit-ow...@millenia.cars.aps.anl.gov
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Ifeffit digest..."
Today's Topics:
1. Ratio of peak amplitudes in R-space (Rana, Jatinkumar Kantilal)
2. Re: Ratio of peak amplitudes in R-space (Christopher Patridge)
3. Re: Ratio of peak amplitudes in R-space (Scott Calvin)
4. How to write feff.inp file for CO adsorbed Cu? (Zhaomo Tian)
5. Re: How to write feff.inp file for CO adsorbed Cu? (Jason Gaudet)
----------------------------------------------------------------------
Message: 1
Date: Wed, 5 Sep 2012 12:01:01 +0000
From: "Rana, Jatinkumar Kantilal"
To: "ifeffit@millenia.cars.aps.anl.gov"
Subject: [Ifeffit] Ratio of peak amplitudes in R-space
Message-ID:
Content-Type: text/plain; Zharset="us-ascii"
Dear Ifeffit community,
I was wondering If I can make a qualitative comparison about the amplitude
ratio of first two shells for various states of same sample ?
For example, I have a sample which is measured at various states, say A, B, C,
D and E during any physical or chemical process.
I get systematic change in the ratio of first two peaks at each state. This
could be interpreted either as change in disorder or as change in number of
atoms associated with first two shells as a result of any physical or chemical
change material has undergone.
As we know that amplitude of peak decreases with increase in distance from
central absorber.
Can I compare the amplitude ratio of first two peaks for various states of same
sample ??
Many thanks in advance !!!
With best regards,
Jatin
________________________________
Helmholtz-Zentrum Berlin f?r Materialien und Energie GmbH
Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher Forschungszentren e.V.
Aufsichtsrat: Vorsitzender Prof. Dr. Dr. h.c. mult. Joachim Treusch, stv.
Vorsitzende Dr. Beatrix Vierkorn-Rudolph
Gesch?ftsf?hrung: Prof. Dr. Anke Rita Kaysser-Pyzalla, Thomas Frederking
Sitz Berlin, AG Charlottenburg, 89 HRB 5583
Postadresse:
Hahn-Meitner-Platz 1
D-14109 Berlin
http://www.helmholtz-berlin.de
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
------------------------------
Message: 2
Date: Wed, 5 Sep 2012 08:28:27 -0400
From: Christopher Patridge
To: XAFS Analysis using Ifeffit
Subject: Re: [Ifeffit] Ratio of peak amplitudes in R-space
Message-ID:
Content-Type: text/plain; Zharset="iso-8859-1"
Jatin,
If these changes are systematic and you somewhat understand the physical or
chemical process associated with the sample, then why not just build a
model and do a structural fitting? A simple peak ratio comparison maybe
helpful but a much stronger argument and interpretation can be made if you
use a structural model to extract these comparisons....
several methods for building a model are available.
buena salud,
Chris Patridge
On Wed, Sep 5, 2012 at 8:01 AM, Rana, Jatinkumar Kantilal <
jatinkumar.r...@helmholtz-berlin.de> wrote:
> Dear Ifeffit community,
>
>
>
> I was wondering If I can make a qualitative comparison about the amplitude
> ratio of first two shells for various states of same sample ?
>
>
>
> For example, I have a sample which is measured at various states, say A,
> B, C, D and E during any physical or chemical process.
>
>
>
> I get systematic change in the ratio of first two peaks at each state.
> This could be interpreted either as change in disorder or as change in
> number of atoms associated with first two shells as a result of any
> physical or chemical change material has undergone.
>
>
>
> As we know that amplitude of peak decreases with increase in distance from
> central absorber.
>
>
>
> Can I compare the amplitude ratio of first two peaks for various states of
> same sample ??
>
>
>
> Many thanks in advance !!!
>
>
>
> With best regards,
>
> Jatin
>
>
>
>
>
> ------------------------------
>
> Helmholtz-Zentrum Berlin f?r Materialien und Energie GmbH
>
> Mitglied der Hermann von Helmholtz-Gemeinschaft Deutscher
> Forschungszentren e.V.
>
> Aufsichtsrat: Vorsitzender Prof. Dr. Dr. h.c. mult. Joachim Treusch, stv.
> Vorsitzende Dr. Beatrix Vierkorn-Rudolph
> Gesch?ftsf?hrung: Prof. Dr. Anke Rita Kaysser-Pyzalla, Thomas Frederking
>
> Sitz Berlin, AG Charlottenburg, 89 HRB 5583
>
> Postadresse:
> Hahn-Meitner-Platz 1
> D-14109 Berlin
>
> http://www.helmholtz-berlin.de
>
> _______________________________________________
> Ifeffit mailing list
> Ifeffit@millenia.cars.aps.anl.gov
> http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
>
>
--
Christopher J. Patridge PhD.
Contact: (315)-529-0501
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
------------------------------
Message: 3
Date: Wed, 5 Sep 2012 08:32:27 -0400
From: Scott Calvin
To: XAFS Analysis using Ifeffit
Subject: Re: [Ifeffit] Ratio of peak amplitudes in R-space
Message-ID: <59b5117d-3960-4548-a617-9ea4022af...@slc.edu>
Content-Type: text/plain; Zharset="iso-8859-1"
Hi Jatin,
It's really best to model such a system using Ifeffit or similar software.
There's a lot that goes into peak height. For one thing, I'm assuming you're
looking at the peak height in the magnitude of the Fourier transform. But the
Fourier transform of the individual scattering paths is complex-valued, not
positive-definite. Thus, two paths contributing at some value of R can
sometimes result in less amplitude than either path alone. Depending on data
ranges and windowing, there's likely to be some contribution from the path that
you're thinking of as corresponding to the first peak at the R of the second,
and vice-versa, and that contribution is not additive when viewed in the
magnitude.
In addition, for the peak at higher-R there may be a significant contribution
from multiple scattering.
It should also be noted that a single peak may be due to unresolved splitting.
For example, a nearest-neighbor octahedron might be distorted, with different
axial and radial distances. In a case like that, a change in the amount of
distortion can have a dramatic effect on the height of the peak.
Having said that, you can make qualitative comparisons in a series like the one
you describe. If you have a suspicion of what might be happening (change in
coordination, change in disorder, change in splitting, etc.), then you can see
it progress by just inspecting the graphs in the way you suggest, and could
probably identify, e.g., a phase change. But for quantitative determinations,
you really need to model the system.
--Scott Calvin
Sarah Lawrence College
On Sep 5, 2012, at 8:01 AM, Rana, Jatinkumar Kantilal wrote:
Dear Ifeffit community,
I was wondering If I can make a qualitative comparison about the amplitude
ratio of first two shells for various states of same sample ?
For example, I have a sample which is measured at various states, say A, B, C,
D and E during any physical or chemical process.
I get systematic change in the ratio of first two peaks at each state. This
could be interpreted either as change in disorder or as change in number of
atoms associated with first two shells as a result of any physical or chemical
change material has undergone.
As we know that amplitude of peak decreases with increase in distance from
central absorber.
Can I compare the amplitude ratio of first two peaks for various states of same
sample ??
Many thanks in advance !!!
With best regards,
Jatin
------------------------------
Message: 4
Date: Wed, 05 Sep 2012 21:47:14 +0900
From: Zhaomo Tian
To: ifeffit@millenia.cars.aps.anl.gov
Subject: [Ifeffit] How to write feff.inp file for CO adsorbed Cu?
Message-ID: <1346849234137.75822.post...@postech.ac.kr>
Content-Type: text/plain; Zharset="us-ascii"
An HTML attachment was scrubbed...
URL:
------------------------------
Message: 5
Date: Wed, 5 Sep 2012 09:25:53 -0400
From: Jason Gaudet
To: XAFS Analysis using Ifeffit
Subject: Re: [Ifeffit] How to write feff.inp file for CO adsorbed Cu?
Message-ID:
Content-Type: text/plain; Zharset="iso-8859-1"
Hi Tian,
What leads you to believe you'd be able to see C or O contributions to the
EXAFS in your sample? CO probing of a catalyst during XAS measurements is
a pretty common experiment (although CO is often not a good probe molecule
for Cu...) but I'm having difficulty coming up with an example where the CO
itself was directly observed in EXAFS. Sulfur, sure, but CO? If your Cu
was monodisperse I suppose it would be less of a stretch to try, but if
you're talking about a Cu surface and expecting to separate Cu-C and Cu-Cu
contributions I'd be worried you may be far overestimating the capabilities
of your experiment.
If you have a cite that suggests this is feasible, it'd be news to me and
I'd be happy to read it.
-Jason
On Wed, Sep 5, 2012 at 8:47 AM, Zhaomo Tian wrote:
> Dear All!
>
> I am a beginner in this field and I have a difficulty in writing feff.inp
> file for my system.
>
> My system is CO gas adsorbed on metal (such as copper)surface and the
> experiment data will be taken on Cu k edge, since it is not crystalline
> structure, I may need to write my own feff.inp file instead of getting it
> from atoms.inp file. Is there anyone who knows how to create a structure
> for my system and how to calculate atomic coordinates of so many atoms?Or a
> simple structure includes only 4 atoms(2 Cu,1 C and 1 O is enough?) Then I
> am asking help for generating feff.inp file(especially all necessary atomic
> coordinates) for Cu-CO. If someone knows it, would you please give me a
> hand?
>
> Thanks a million
>
> Best Regards,
>
>
>
> *Tian Zhaomo*
>
> *M.S. candidate*
>
>
>
>
>
> *Lab. For Photosynthesis Materials and Devices*
>
> Department of Materials Science and Engineeing,POSTECH
>
> san 31, Hyoja-Dong, Nam-Gu,
> Pohang, 790-784, Republic of Korea
>
>
>
> office: +82-54-279-2827
>
> mobile: +82-10-7747-3790
>
> e-mail: zhaomo1...@postech.ac.kr
>
>
>
> _______________________________________________
> Ifeffit mailing list
> Ifeffit@millenia.cars.aps.anl.gov
> http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
------------------------------
_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
End of Ifeffit Digest, Vol 115, Issue 2
***************************************
_______________________________________________
Ifeffit mailing list
Ifeffit@millenia.cars.aps.anl.gov
http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
