Hi Dan, I had the same problem recently. It can be avoided by importing each scan seperately.
Regards Tim Karlsruher Institut für Technologie (KIT) Institut für Nukleare Entsorgung (INE) Tim Prüßmann Hermann-von-Helmholtz-Platz 1 D-76344 Eggenstein-Leopoldshafen tim.pruessm...@kit.edu www.ine.kit.edu KIT - Universität des Landes Baden-Württemberg und nationales Großforschungszentrum in der Helmholtz-Gemeinschaft -----Original Message----- From: ifeffit-boun...@millenia.cars.aps.anl.gov [mailto:ifeffit-boun...@millenia.cars.aps.anl.gov] On Behalf Of Daniel Whittaker Sent: Thursday, September 06, 2012 10:30 AM To: XAFS Analysis using Ifeffit Subject: Re: [Ifeffit] Importing Multiple Data Sets into Athena Hi Scott, I have attached 3 of the data files and the Zr foil ref scan (already calibrated). I first import the reference Zr foil scan and then the 3 files. The Numerator for the data is column 30 and i also import the ref channel where the numerator is column 7. If i choose to set ref to standard values (as you would expect that to work) it fails and makes processing difficult. The only way round it i see is to import each data set individually and set the element, edge and value of E0 manually (for the reference - the data is read correctly) before then using the "align marked groups" function to align all the data to the standard Zr foil i imported at the start. Having played with the setting on the preprocess tab if you check the "align to standard" radio button it aligns the data (not the reference channel) despite the fact the "same element" radio is not checked - should the preprocessing not apply to the reference channel (if present) before the data channel? As i say it is not a huge problem and i only report it in the interest of bug removal. Thanks, Dan -------------------------------------------------- From: "Scott Calvin" <scal...@sarahlawrence.edu> Sent: Wednesday, September 05, 2012 6:13 PM To: "XAFS Analysis using Ifeffit" <ifeffit@millenia.cars.aps.anl.gov> Subject: Re: [Ifeffit] Importing Multiple Data Sets into Athena > Hi Dan, > > Could you attach the data files you are trying to import? We can see > if the problem is reproducible on our systems. > > --Scott Calvin > Sarah Lawrence College > > On Sep 5, 2012, at 10:50 AM, Daniel Whittaker wrote: > > Hello all, > > I am having a small issue when importing multiple data sets into > Athena all of which have a reference channel. > > The issue i am experiencing is that when importing multiple data sets > together they do not all import correctly. The first data set (of all > selected) imports fine (The data is Np and the reference Zr foil) - it > imports the reference file which can be aligned to the calibration Zr > foil file. However, the remainder of the files do not work at all, the > reference channel does not import correctly at all. I have tried (best > as i can tell) all of the pre-process options to no avail. When i > import them individually it works although I have to tell it what > element the ref channel is and the edge and E0 (couldn't the edge and > E0 be linked such that selection of one filled the other?) but this > isn't too much of an issue. > It is by no means a massive problem but i thought i would ask if there > is a way around it or if it is a real bug? > All other multiple data processing - such as "align marked groups" - > works fine. > Regards, > Dan Whittaker > > > > _______________________________________________ > Ifeffit mailing list > Ifeffit@millenia.cars.aps.anl.gov > http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit > _______________________________________________ Ifeffit mailing list Ifeffit@millenia.cars.aps.anl.gov http://millenia.cars.aps.anl.gov/mailman/listinfo/ifeffit
