On Tue, Dec 30, 2008 at 11:07 PM, amit kumar <[email protected]> wrote:
> well gunjan i had tried it a no. of times but it is not working at all . > > please explain "he locks on the side must not be loose" > > On Tue, Dec 30, 2008 at 11:05 PM, Gunjan Patidar <[email protected]>wrote: > >> Hi, >> >> >> On Tue, Dec 30, 2008 at 11:00 PM, amit kumar <[email protected]>wrote: >> >>> guys please help,sorry this is not related to LINUX ,but i need your >>> help. >>> >>> i had changed RAM on one of my computers and now it had stopped working >>> ,it makes a beep sound when i click on power button ,and the computer does >>> not starts (i.e. no display on monitor) >>> >>> >>> please help!! >>> >>> >>> >> This might be because the ram was not installed properly. >> >> Open up the cabinet, take out the ram (take out all of them to be sure) >> and reinsert them in the socket. make sure they are firmly in place. the >> locks on the side must not be loose >> >> >> -- >> Gunjan Patidar >> Rodney Dangerfield - "The way my luck is running, if I was a politician I >> would be honest." >> >> > > > > I meant the two latches which hold the ram in place. They are on both sides. they must be tighly holding the ram. after installing if you try to pull the ram out directly, it should not come out. -- Gunjan Patidar Fran Lebowitz - "My favorite animal is steak." --~--~---------~--~----~------------~-------~--~----~ l...@iitd mailing list -- group http://groups.google.com/group/iitdlug -~----------~----~----~----~------~----~------~--~---
