I am installing HP Deskjet F4488 Printer-Scanner-Fax on my SchoolOs1.0
connected via USB. I am using hplip for installing the HP drivers for
Printer-Scanner-Fax. hplip- 3.9.8 is installed through Synaptic.
On using "hp-setup" after further instructions there is the error "Printer
queue setup failed. Please restart CUPS and try again"
And the output of "hp-check -t" is as
***********************************
$hp-check -t
HP Linux Imaging and Printing System (ver. 3.9.8)
Dependency/Version Check Utility ver. 14.3
Copyright (c) 2001-9 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling
the
HPLIP supplied tarball (.tar.gz or .run) to determine if the proper
dependencies
are installed to successfully compile
HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a
distro
supplied package (.deb, .rpm, etc) or an already built HPLIP supplied
tarball
has the proper dependencies installed to successfully
run.
3. Both compile- and run-time check mode (-b or --both) (Default): This
mode
will check both of the above cases (both compile- and run-time
dependencies).
Saving output in log file: hp-check.log
Initializing. Please wait...
---------------
| SYSTEM INFO |
---------------
Basic system information:
Linux idiotbox 2.6.31-22-generic #60-Ubuntu SMP Thu May 27 00:22:23 UTC 2010
i686 GNU/Linux
Distribution:
ubuntu 9.10
Checking Python version...
OK, version 2.6.4 installed
Checking PyQt 4.x version...
OK, version 4.6 installed.
Checking for CUPS...
Status: scheduler is running
Version: 1.4.1
error_log is set to level: warn
Checking for dbus/python-dbus...
dbus daemon is running.
python-dbus version: 0.83.0
------------------------------------
| COMPILE AND RUNTIME DEPENDENCIES |
------------------------------------
note: To check for compile-time only dependencies, re-run hp-check with the
-c parameter (ie, hp-check -c).
note: To check for run-time only dependencies, re-run hp-check with the -r
parameter (ie, hp-check -r).
Checking for dependency: CUPS - Common Unix Printing System...
OK, found.
Checking for dependency: CUPS DDK - CUPS driver development kit...
warning: NOT FOUND! This is an OPTIONAL/RUNTIME ONLY dependency. Some HPLIP
functionality may not function properly.
To install this dependency, execute this command:
sudo aptitude install --assume-yes cupsddk cupsddk-drivers
Checking for dependency: CUPS devel- Common Unix Printing System development
files...
OK, found.
Checking for dependency: CUPS image - CUPS image development files...
OK, found.
Checking for dependency: DBus - Message bus system...
OK, found.
Checking for dependency: gcc - GNU Project C and C++ Compiler...
OK, found.
Checking for dependency: GhostScript - PostScript and PDF language
interpreter and previewer...
OK, found.
Checking for dependency: libcrypto - OpenSSL cryptographic library...
OK, found.
Checking for dependency: libjpeg - JPEG library...
OK, found.
Checking for dependency: libnetsnmp-devel - SNMP networking library
development files...
OK, found.
Checking for dependency: libpthread - POSIX threads library...
OK, found.
Checking for dependency: libtool - Library building support services...
OK, found.
Checking for dependency: libusb - USB library...
OK, found.
Checking for dependency: make - GNU make utility to maintain groups of
programs...
OK, found.
Checking for dependency: PIL - Python Imaging Library (required for
commandline scanning with hp-scan)...
OK, found.
Checking for dependency: PolicyKit - Administrative policy framework...
OK, found.
Checking for dependency: PyQt 4 DBus - DBus Support for PyQt4...
OK, found.
Checking for dependency: Python DBus - Python bindings for DBus...
OK, found.
Checking for dependency: Python devel - Python development files...
OK, found.
Checking for dependency: Python libnotify - Python bindings for the
libnotify Desktop notifications...
OK, found.
Checking for dependency: Python XML libraries...
OK, found.
Checking for dependency: Python 2.3 or greater - Required for fax
functionality...
OK, found.
Checking for dependency: Python 2.2 or greater - Python programming
language...
OK, found.
Checking for dependency: Reportlab - PDF library for Python...
OK, found.
Checking for dependency: SANE - Scanning library...
OK, found.
Checking for dependency: SANE - Scanning library development files...
OK, found.
Checking for dependency: scanimage - Shell scanning program...
OK, found.
Checking for dependency: xsane - Graphical scanner frontend for SANE...
OK, found.
----------------------
| HPLIP INSTALLATION |
----------------------
Currently installed HPLIP version...
HPLIP 3.9.8 currently installed in '/usr/share/hplip'.
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.9.8
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/hplip/HP
ppdbase=/usr/share/ppd/hplip
doc=/usr/share/doc/hplip-doc/HTML
icon=no
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=yes
foomatic-ppd-install=yes
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.9.8.36
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
hpijs-only-build=no
lite-build=no
udev-acl-rules=yes
Current contents of '/var/lib/hp/hplip.state' file:
# hplip.state - HPLIP runtime persistent variables.
[plugin]
installed=0
eula=0
Current contents of '~/.hplip/hplip.conf' file:
[last_used]
printer_name =
working_dir = .
device_uri = hp:/usb/Deskjet_F4400_series?serial=CN03TC53J505C5
[commands]
scan = /usr/bin/xsane -V %SANE_URI%
[installation]
version = 3.9.8.36
date_time = Friday 08 April 2011 17:50:38
[settings]
systray_messages = 0
systray_visible = 0
[fax]
email_address =
voice_phone =
[refresh]
rate = 30
enable = true
type = 1
[polling]
enable = false
device_list =
interval = 5
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
Device URI Model
-------------------------------- -----------------------
hp:/usb/Deskjet_F4400_series?ser HP Deskjet F4400 series
ial=CN03TC53J505C5
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
CUPS-PDF
--------
Type: Unknown
Device URI: ///dev/null
----------------------
| SANE CONFIGURATION |
----------------------
'hpaio' in '/etc/sane.d/dll.conf'...
'hpaio' in '/etc/sane.d/dll.d/hplip'...
OK, found. SANE backend 'hpaio' is properly set up.
Checking output of 'scanimage -L'...
device `hpaio:/usb/Deskjet_F4400_series?serial=CN03TC53J505C5' is a
Hewlett-Packard Deskjet_F4400_series all-in-one
---------------------
| PYTHON EXTENSIONS |
---------------------
Checking 'cupsext' CUPS extension...
OK, found.
Checking 'pcardext' Photocard extension...
OK, found.
Checking 'hpmudext' I/O extension...
OK, found.
Checking 'scanext' SANE scanning extension...
OK, found.
-----------------
| USB I/O SETUP |
-----------------
Checking for permissions of USB attached printers...
HP Device 0x7711 at 001:004:
Device URI: hp:/usb/Deskjet_F4400_series?serial=CN03TC53J505C5
Device node: /dev/bus/usb/001/004
Mode: 0664
---------------
| USER GROUPS |
---------------
abdullah adm dialout cdrom plugdev lpadmin admin sambashare mysql both
-----------
| SUMMARY |
-----------
error: 1 error or warning.
Summary of needed commands to run to satisfy missing dependencies:
sudo aptitude install --assume-yes cupsddk cupsddk-drivers
Please refer to the installation instructions at:
http://hplip.sourceforge.net/install/index.html
*****************************************************
Please help in installing the HP Deskjet F4488 printer-scanner-fax
--
--------------------------------------------
Mohammad Abdullah
Because Open Source Matters <http://fsf.org>
--------------------------------------------
--
LUG@IITD - http://lug-iitd.org/Footer
