Hi Fromthe settings, it appears that you have a an ISA card. Do you? If so, I am afraid, it would be a pain in the neck to configure it. I have no I dea about them. You see, if you read the header of this mail, you would find that it has been sent from windows. I havent yet been able to configure my internal PCI winmodem. And they say thaqt its easier than ISA devices. Anyway, you dont need the sound to go ahead with most of the C++ programming? Do you? What kind of permission denials are you getting there? By the way, I am pleased not to ask you to get rid of Red Hat and switch over to Mandrake, but to switch over to Debian. Debian dosent have any graphical config utils at all, but its REALLY THE GREATEST. greetings, Sayan Chakraborti [EMAIL PROTECTED] ----- Original Message ----- From: "Arun Sreelalan" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Friday, December 27, 2002 2:16 PM
> In regard to my sound card problem (ISA YAMAHA > OPL3-SA3), you asked me > to open up the card and find the details. What do you exactly > mean? I cant open > up the hardware chip itself, it would get damaged. From Windows, I > found the > following information about my card :- > > I/O Range - 0220 - 022F > 0530 - 0537 > 0388 - 038B > 0330 - 0331 > 0370 - 0371 > > IRQ 05 > DMA 00 > DMA 01 > > In Linux, when I run 'sndconfig', after detecting my card, it asks > me to select > one of the following combinations (dip switches) :- > > I/O PORT (0x530, 0x534, 0x604, 0xe80, 0xf40) Default > selected 0x530 > IRQ (5,7,9,10,11) Default selected 5 > DMA 1 (0,1,3) Default selected 1 > DMA 2 (0,1,3) Default selected 0 > > I selected the following combination :- > > I/O PORT 0x530 > IRQ 5 > DMA 1 0 > DMA 2 1 > > When I start my machine, after the memory test, when the slot > details are > displayed, it reports : > ISA/PnP DEVICES > > CARD NO. 1 > DEVICE NO. 3 > IRQ 11 > DMA 0,0 > NAME OPL3-SA3 Sound Board > > All the three tables seem contradictory! Which combo do I > choose? > > Also regardless of whichever one I choose, when 'sndconfig' tries > to play a > sample sound, it bungs an error saying that it could not open > /dev/audio. I > found that even the root did not have r/w/x permssions to this > file, so I > changed the permissions to r/w/x for everybody. But still the same > error pops > up every time. I dont have the documentation for my card, and I > cant find it on > the Net. Please dont ask me to get rid of Red Hat and switch over > to Mandrake. Can you tell me if there is any graphical config util > in RH8. > I'm a C++ programmer, but because of permission denials and other > such trifling problems as these, I cant get productive in linux, > so plz help me out. > > > > Arun Sreelalan > [EMAIL PROTECTED] (linux related stuff) > [EMAIL PROTECTED] (everything else) > > -- > To unsubscribe, send mail to [EMAIL PROTECTED] with the body > "unsubscribe ilug-cal" and an empty subject line. > FAQ: http://www.ilug-cal.org/node.php?id=3 > > -- To unsubscribe, send mail to [EMAIL PROTECTED] with the body "unsubscribe ilug-cal" and an empty subject line. FAQ: http://www.ilug-cal.org/node.php?id=3
