what u've suggested is alredy done..
question was something else...
like...
# how can i assign or specify that "eth0" [- means the ethernet card connected with the DIAS having DHCP specified IP address each time its boot] as a gateway to "eth1" [- which is 192.168.0.254]..?
rgds,
somu
hizibiz writes:
1. In other machines of the network make 192.168.0.254 as the gateway.
2. in the squid box as root give
echo "1" >> /proc/sys/net/ipv4/ip_forward
3. give an accept rule in the FORWARD chain of iptable to forward ICMP echo type packet (this is your home work). otherwise (very unwise) disable firewall in the squid box.
--hizibiz
On Fri, 1 Apr 2005 [EMAIL PROTECTED] wrote:
hello everyone!!
plz help me or give me some pointers for the following situation.
i am having (squid configured)linux box with two ethernet card within which,
"eth0" is connected to DIAS(PPoE), which receives its IP address from a DHCP server from ISP end,
"eth1" is connected to local swtich having 192.168.0.254 as its IP address.
now, i am not able to "ping" any external IP address from my LAN just because i'm not able to map "eth0" as a gateway of "eth1" since "eth0" receives its IP address dynamically from the ISP end.
how will i do that?
thanks in advance..
rgds
somu
--
To unsubscribe, send mail to [EMAIL PROTECTED] with the body
"unsubscribe ilug-cal" and an empty subject line.
FAQ: http://www.ilug-cal.org/node.php?id=3
-- To unsubscribe, send mail to [EMAIL PROTECTED] with the body "unsubscribe ilug-cal" and an empty subject line. FAQ: http://www.ilug-cal.org/node.php?id=3
-- To unsubscribe, send mail to [EMAIL PROTECTED] with the body "unsubscribe ilug-cal" and an empty subject line. FAQ: http://www.ilug-cal.org/node.php?id=3
