On Sat, Oct 10, 2009 at 10:06 AM, subin sebastien <subinsebast...@yahoo.com> wrote: > > I've tried to update the firmware. But the config page shows an error. > Anyway the modem is working until a power failure occurs. I think it > may be a h/w trouble...
Yeah. I believe the modem will work well until a power failure or if your switch it off and then turn it on, then again the settings are set back to default, right? It should be a hardware problem, where the settings that you change are not getting saved in it. Same was the issue with my modem, which i took it to the exchange and got it replaced. Probably, you should also do the same... This would be a hardware problem. -- Joju Joshua <Change is something that cannot be changed> --~--~---------~--~----~------------~-------~--~----~ "Freedom is the only law". "Freedom Unplugged" http://www.ilug-tvm.org You received this message because you are subscribed to the Google Groups "ilug-tvm" group. To post to this group, send email to ilug-tvm@googlegroups.com To unsubscribe from this group, send email to ilug-tvm-unsubscr...@googlegroups.com For details visit the website: www.ilug-tvm.org or the google group page: http://groups.google.com/group/ilug-tvm?hl=en -~----------~----~----~----~------~----~------~--~---
