Hi All, This is the continuation of the mail which I had posted with the subject [Help requested for route command ( To access other side of VPN Server )]
IP forwarding
IPtables flushed
selinx disabled
route command pushed to client
My VPN Client ip is 192.168.3.101
and My VPN Server interfaces are
eth0= connected to the public IP
eth1= interface is 192.168.50.30/24
I did a openvpn connection from my client to OpenVPN Server now
my client interfaces are
eth0 = 192.168.3.101
tun0 = 10.28.0.10
My Server interfaces are
eth0 = Public IP
eth1 = 192.168.50.30/24
LAN GW = 192.168.50.1
tun0 = 10.28.0.1
My Server route -n command shows
[root@reserved-94 openvpn]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use
Iface
10.10.10.11 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
10.28.0.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0
XXX.XX.XX.XX 0.0.0.0 255.255.255.252 U 1 0 0 eth0
10.28.0.0 10.28.0.2 255.255.255.0 UG 0 0 0 tun0
192.168.50.0 0.0.0.0 255.255.255.0 U 1 0 0 eth1
0.0.0.0 XXX.XX.XX.XX 0.0.0.0 UG 0 0 0 eth0
I am able to connect to the server from my clients, but clients cannot ping
behind VPN eth1 interfaces
ie from my client I can ping VPNServer eth1 (192.168.50.30), but cannot
ping to the other side, It has to do some setting with route command.
I am able to connect to the server from my clients, but clients cannot ping
behind VPN eth1 interfaces
ie from my client I can ping VPNServer eth1 (192.168.50.30), but cannot
ping to the other side, ie to some machine inside VPN server LAN , let it
be 192.168.50.25 . It has to do some setting with route command.
Please note that :-
In VPN server machine (192.168.50.30) when I did a reverse route to my
clienet PC network,
ie route add -net 192.168.3.0 netmask 255.255.255.0 gw 10.28.0.2
and in the VPN -LAN -PC (192 .168.50.25) when I did
route add -net 192.168.3.0 netmask 255.255.255.0 gw 192.168.50.30
I am able to ping from VPN-LAN Machine to my client ie from 192.168.20.25
I can ping to 192.168.3.101
Some of the route command which I tried in the VPN server and was not
success are
route add -net 192.168.50.0 netmask 255.255.255.0 gw 192.168.50.1
Now the situation is
>From the client I can traceroute till VPN server and vice versa
>From VPN -LAN -PC (192.168.50.25) I can ping to VPN Client 192.168.3.101
(after giving route add -net 192.168.3.0 netmask 255.255.255.0
gw 192.168.50.30 at 20.25)
I cannot ping /tracerote from client to VPN LAN PC ( ie Cannot ping from
192.168.3.101 to 192.168.50.25)
I have attached an image of the Network
thanks
Joseph John
--
--
"Freedom is the only law".
"Freedom Unplugged"
http://www.ilug-tvm.org
You received this message because you are subscribed to the Google
Groups "ilug-tvm" group.
To control your subscription visit
http://groups.google.co.in/group/ilug-tvm/subscribe
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For details visit the google group page:
http://groups.google.com/group/ilug-tvm?hl=en
---
You received this message because you are subscribed to the Google Groups "Free
Software Users Group, Thiruvananthapuram" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
05010800.PDF
Description: Adobe PDF document
