Dear All,

lspci -n shows
00:00.0 0600: 8086:2a40 (rev 07)
00:01.0 0604: 8086:2a41 (rev 07)
00:02.0 0300: 8086:2a42 (rev 07)
00:19.0 0200: 8086:10f5 (rev 03)
00:1a.0 0c03: 8086:2937 (rev 03)
00:1a.1 0c03: 8086:2938 (rev 03)
00:1a.2 0c03: 8086:2939 (rev 03)
00:1a.7 0c03: 8086:293c (rev 03)
00:1b.0 0403: 8086:293e (rev 03)
00:1c.0 0604: 8086:2940 (rev 03)
00:1c.1 0604: 8086:2942 (rev 03)
00:1c.3 0604: 8086:2946 (rev 03)
00:1d.0 0c03: 8086:2934 (rev 03)
00:1d.1 0c03: 8086:2935 (rev 03)
00:1d.2 0c03: 8086:2936 (rev 03)
00:1d.7 0c03: 8086:293a (rev 03)
00:1e.0 0604: 8086:2448 (rev 93)
00:1f.0 0601: 8086:2917 (rev 03)
00:1f.2 0106: 8086:2929 (rev 03)
00:1f.3 0c05: 8086:2930 (rev 03)
01:00.0 0300: 10de:06e5 (rev a1)
06:00.0 0280: 168c:002a (rev 01)
0b:04.0 0607: 1180:0476 (rev ba)
0b:04.1 0c00: 1180:0832 (rev 04)
0b:04.2 0805: 1180:0822 (rev 21)
0b:04.4 0880: 1180:0592 (rev 11)

and dmesg | grep Ethernet shows
[   16.995670] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

"modprobe ixgbe"  loads module but  did not work.


Regards,
Krishna


On Wed, Mar 27, 2013 at 11:00 AM, Baskar Selvaraj <[email protected]>wrote:

> >
> > I have a Intel 82567LM (rev 03) Gigabit network card onboard on my
> laptop.
> > I am using ubuntu 12.10 OS and the default driver e1000e does not work. I
> > do not see ethX with ifconfig -a
> >
> > ethtool -e eth0 emits this error message:
> > Cannot get driver information: No such device
>
> > lspci shows the following entry :
> > 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network
> > Connection (rev 03)
>
> Try  lspci -n  and post the numerical IDs and also look in kernel messages
>
> dmesg | grep Ethernet
>
> --
> S. Baskar
>
> Twitter  : http://twitter.com/linuxbaskar
> LinkedIN : http://www.linkedin.com/pub/baskar-selvaraj/21/881/b29
> _______________________________________________
> ILUGC Mailing List:
> http://www.ae.iitm.ac.in/mailman/listinfo/ilugc
>
_______________________________________________
ILUGC Mailing List:
http://www.ae.iitm.ac.in/mailman/listinfo/ilugc

Reply via email to