----- Original Message ----- 
  From: Anima Rai 
  To: [EMAIL PROTECTED] ; [EMAIL PROTECTED] ; Nikunj Virani ; Sahil Gupta - NET4U 
LIMITED ; [EMAIL PROTECTED] 
  Cc: [EMAIL PROTECTED] 
  Sent: Tuesday, July 08, 2003 2:29 PM
  Subject: Login OK but no logging


  Hi all,
  Can anybody help me please? I am using IC-Radius 0.18 with PM4. I have checked 
thouroughly the FAQs and mail archives and found many similar problems too but their 
solutions either were not posted or they never resolved. So, when a user dials the 
RAS, radius.log shows Login OK (though duplicate packet lines are there) but the user 
m/c gives error as ' no valid response from the remote m/c'). PM has been configured 
to respond dynamic IPs from the boards (tried with IP pools too but it didn't worked. 
One more thing is that the PM is colocated at telco premises and Radius and other 
servers are at our office. So between the PM and Radius there are 2 routers though 
static IPs are specifically given on both the routers. Can anybody help?
   
  Radius.log
  ===============
  Tue Jul  8 13:26:00 2003: Error: Dropping duplicate authentication packet from 
client nas1 - ID: 2
  Tue Jul  8 13:26:03 2003: Auth: Login OK: [samkhya] (from nas nas1/S2) socket 0 (0 
sec)
  Tue Jul  8 13:26:06 2003: Error: Dropping duplicate authentication packet from 
client nas1 - ID: 2
  Tue Jul  8 13:26:09 2003: Auth: Login OK: [samkhya] (from nas nas1/S2) socket 0 (0 
sec)
  Tue Jul  8 13:26:12 2003: Error: Dropping duplicate authentication packet from 
client nas1 - ID: 2

  Using radius -xyz
  ===============
   User-Name = "samkhya"
      CHAP-Password = "\001\205\006\3302\240\000\000\000\000\000\000\000\000\000\000"
      NAS-IP-Address = 202.56.x.x
      NAS-Port-Id = 0
      NAS-Port-Type = Async
      Service-Type = Framed-User
      Framed-Protocol = PPP
      Connect-Info = "44000 LAPM/V42BIS"
      Called-Station-Id = "172123"
      User-Name = "samkhya"
      CHAP-Password = "\001E\025J\265\301\327S\246\034\246\334\271\350\226S\036"
      NAS-IP-Address = 202.56.x.x
      NAS-Port-Id = 11
      NAS-Port-Type = Async
      Service-Type = Framed-User
      Framed-Protocol = PPP
      Connect-Info = "44000 LAPM/V42BIS"
      Called-Station-Id = "172123"
      Framed-IP-Address = 255.255.255.254
      Framed-IP-Netmask = 255.255.255.0
      Framed-Compression = Van-Jacobson-TCP-IP
      Framed-Protocol = PPP
      Idle-Timeout = 1800
      Port-Limit = 1
      Service-Type = Framed-User
      Session-Timeout = 28800
      Auth-Type = Crypt-Local
   
  PM4 Routing table
  =================
      
  Command 4 (Global view)> show routes
  local ip adddresses:  192.168.0.3  202.56.x.x  172.20.20.1  
  Destination        Mask Gateway              Source  Flag Met  Interface 
  -----------------  ---- -------------------- ------- ---- ---  --------- 
  0.0.0.0             0   202.56.x.y              local   NS     1  ether1 
  172.20.20.1        32   172.20.20.1          local   HL     1  local2 
  202.56.x.x      32   202.56.x.x        local   HL     1  local1 
  202.56.231.brdcst      29   202.56.x.x        local   NL     1  ether1 
  192.168.0.0        16   192.168.0.3          local   NL     1  ether0 


_______________________________________________
ilugd mailing list
[EMAIL PROTECTED]
http://frodo.hserus.net/mailman/listinfo/ilugd

Reply via email to