hello all ,
well i want to know if any one has configure the same
( moxa C502-ISA/35 dual Sync Board) on Rh6.2 kernel
2.2.14-5 when i install drivers of that which are
downloaded from site (www.moxa.com.tw) they get
install with out any errors but when i do
#insmod mxc502
#insmod sysncppp
#insmod mxc502m baseaddr=0xCC00 txclock=0 speed=64000
bps isairq=4
it gives me error in command 3
like --> /lib/modules/2.2.14-5.0/net/mxc502m.o :
init_module Device or resource busy
and that time at dmesg this is the output of the
command given
-->mxc502m: Not any Moxa board is set.
-->Some of the required outputs
# lsmod
Module Size Used by
syncppp 8776 0 (unused)
mxc502 3040 0
lockd 31592 1 (autoclean)
sunrpc 53540 1 (autoclean) [lockd]
rtl8139 12388 1 (autoclean)
# less /var/log/messages
Sep 12 16:05:43 router kernel: Generic Moxa C502 board
interface driver v1.0
Sep 12 16:19:19 router kernel: Cronyx Ltd, Synchronous
PPP and CISCO HDLC (c) 1994
Sep 12 16:19:19 router kernel: Linux port (c) 1998
Building Number Three Ltd & J
an "Yenya" Kasprzak.
#dmesg
# less /proc/interrupts
CPU0
0: 84008 XT-PIC timer
1: 1165 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 1 XT-PIC rtc
11: 945 XT-PIC eth0
13: 1 XT-PIC fpu
14: 534839 XT-PIC ide0
NMI: 0
and
#less /proc/ioports
0000-001f : dma1
0020-003f : pic1
0040-005f : timer
0060-006f : keyboard
0070-007f : rtc
0080-008f : dma page reg
00a0-00bf : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial(auto)
6000-6007 : ide0
6008-600f : ide1
6200-627f : eth0
what could be that ?
and how to short out this error ?
WEll if some one has done the same or some one has
pointer for this thanks in adv
dhanraj sheth
__________________________________
Do you Yahoo!?
Yahoo! SiteBuilder - Free, easy-to-use web site design software
http://sitebuilder.yahoo.com
_______________________________________________
ilugd mailing list
[EMAIL PROTECTED]
http://frodo.hserus.net/mailman/listinfo/ilugd
