Dear Sir,

I had checked the link but I can't understand how that routes will burst my
speed
using split options my 50% network will have only 512 kbps at same time and
other 50% are same

also load balancing will give only standby line of 512 kbps

will you please explain how can I get 1 mbps output?

Swapnil K.
----- Original Message -----
From: "Raj Mathur" <[EMAIL PROTECTED]>
To: "The Linux-Delhi mailing list" <[email protected]>
Sent: Tuesday, December 27, 2005 9:02 PM
Subject: Re: [ilugd] Linux Based routers


> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> >>>>> "Swapnil" == SWAPNIL  <[EMAIL PROTECTED]> writes:
>
>     Swapnil> Dear All, We have two 512 kbps broadband lines from VSNL
>     Swapnil> with static IP address and ADSL router.
>
>     Swapnil> Currently I want to club both the lines in a single Linux
>     Swapnil> System and get an total 1 mbps bandwidth for load
>     Swapnil> balancing.
>
>     Swapnil> How can we achieve this? What do we need to do?
>
> 4.2. Routing for multiple uplinks/providers
>
> http://www.tldp.org/HOWTO/Adv-Routing-HOWTO/lartc.rpdb.multiple-links.html
>
> Also look at 4.2.2 Load Balancing
>
> lartc.org is down for some reason.
>
>     Swapnil> One suggested the option of using BGP / OSPF in Linux
>     Swapnil> based router with zebra, but I am new to Linux and
>     Swapnil> routers what should I do?  Is there any other option ?
>     Swapnil> If anybody has faced same scenario please help me.  you
>     Swapnil> can view current setup and new requirements at following
>     Swapnil> link
>
> You don't need BGP or any such funky routing protocol as long as
> you don't have a requirement for incoming connections.
>
> BTW, it probably isn't a very good idea to send mail as postmaster.
>
> Regards,
>
> - -- Raju
> - --
> Raj Mathur                [EMAIL PROTECTED]      http://kandalaya.org/
>        GPG: 78D4 FC67 367F 40E2 0DD5  0FEF C968 D0EF CC68 D17F
>                       It is the mind that moves
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.2 (GNU/Linux)
> Comment: Processed by Mailcrypt 3.5.8 <http://mailcrypt.sourceforge.net/>
>
> iD8DBQFDsV6VyWjQ78xo0X8RAqBLAJ4u2T9pTHmQocY94u7oJjNUmXcYCACgh3HX
> ieJcJnKs8nLTZnEuBOWwvYI=
> =D/mr
> -----END PGP SIGNATURE-----
>
> _______________________________________________
> ilugd mailinglist -- [email protected]
> http://frodo.hserus.net/mailman/listinfo/ilugd
> Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
http://www.mail-archive.com/[email protected]/
>
>


_______________________________________________
ilugd mailinglist -- [email protected]
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi 
http://www.mail-archive.com/[email protected]/

Reply via email to