ankit walia wrote:
>hi all,
>i hv recently started using linux.
>i hv used cd creater from go menu which opens burn/// folder but when i put
>content to burn then it shows some message n not burn.
>plz help
>_______________________________________________
>
>
You need to know first where on which device has put the cd writing device
1. Go to xerm/konxole or Press Ctrl+Alt+F1, adn enter the CLI mode
anyway you like.
2. Login in the console
4. Since you most probably have an IDE cd writer
#dmesg |grep CD
this will tell you which device is your CD/DVD writer.
5. Open K3b. Go To Settings and Select K3b Setup.
6. Enter the root password
7. Set the device up in the device options
8. If you have a scsi cd/DVD writer
9. run cdrecoed -scanbus
10. follow steps 5-8.
Manpreet Singh Nehra
_______________________________________________
ilugd mailinglist -- [email protected]
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
http://www.mail-archive.com/[email protected]/
