> [53853.204000] usb 2-8: new full speed USB device
> using ohci_hcd and address 8
> [53853.424000] usb 2-8: configuration #1 chosen from
> 1 choice
> [53853.424000] pl2303 2-8:1.0: pl2303 converter
> detected
> [53853.424000] usb 2-8: pl2303 converter now
> attached to ttyUSB0
>
Is lsusb showing the pl2303 device ? Normally when a
pl2303 device is connected it shows the manufacurer id
too.
IMHO looks like usbserial module is not loading. Do
an lsmod and see if usbserial is loaded or not. You
might have to pass the vendor and product id while
loading usbserial. Vendor and product id can be
obtained from /proc .
As the device is pl2303 based, normal mounting of
filesystem will not work. You need to use one of the
sync utilities to talk to the device, this is
something similar to using a palm device.
I would suggest what Gora has said, if you can give
us the device for a day or two we might be able to
extract the data.
regards
VK
Engineers normally have problem with every solution. If not they have a
solution in search of a problem.
Disclaimer
The facts expressed here belong to everybody, the opinions to me. The
distinction is yours to draw...
____________________________________________________________________________________Sick
sense of humor? Visit Yahoo! TV's
Comedy with an Edge to see what's on, when.
http://tv.yahoo.com/collections/222
_______________________________________________
ilugd mailinglist -- [email protected]
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
http://www.mail-archive.com/[email protected]/
