| 2. setup NAT for translation 192.168.0.x to 10.81.0.x | | 3. configure routers as : | - 192.168.0.5/6/7 ( for 3 wifi routers in each lab )
Hi, Easier way is to use the wireless routers as Access points (dont connect the wan interface to the switch, just connect one of the 4 lan ports to the switch). If your internet is through a DHCP-server capable device (like a DSL router) just use that to serve DHCP addresses to all the PCs. You can also use an old PC with monowall or pfsense to act as the firewall/gateway etc. This way all your computers will be on the same LAN segment. With Warm Regards, Shivkumar linux user no: 450769 blog: outbackwifi.blogspot.com website: www.outbackwifi.com "See you at 'Freed.in - freedom in technology & software' - India's leading free and open source community event. 28- 29 September 2007, New Delhi. Entry free, on first come basis. Register at http://Freed.in"; ____________________________________________________________________________________ Pinpoint customers who are looking for what you sell. http://searchmarketing.yahoo.com/ _______________________________________________ ilugd mailinglist -- [email protected] http://frodo.hserus.net/mailman/listinfo/ilugd Next Event: http://freed.in - September 28-29, 2007 Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/[email protected]/
