On Nov 12, 2007 9:52 PM, Kazim Zaidi <[EMAIL PROTECTED]> wrote: > On 19/10/2007, Sahil Dave <[EMAIL PROTECTED]> wrote: > [snip] > > Sahil, did you get the problem solved. A friend of mine today asked the > same > > question, and so I was able to run his MTNL modem using USB. > > You may've to try > /sbin/modprobe cdc-ether > > And if you see the message "usb 2-2: No configuration chosen from ... > choices" > in dmesg output, then try configuration 1, > echo -n 1 > /sys/bus/usb/devices/2-2/bConfigurationValue > Replace 2-2 with the actual number you see in dmesg output. > > Using these commands, a new interface eth1 was enabled as > CDC USB Ethernet. >
thanx for the info. kazim, but fortunately i have replaces almost everything in my pc now. so i am using ethernet connection in fiesty. but i'll try to connect thru usb, and do wat u have said.. i hope this helps me and others who faced a similar problem.. -- Sahil MCA(SE) USIT GGSIPU, Kashmere Gate Delhi _______________________________________________ ilugd mailinglist -- [email protected] http://frodo.hserus.net/mailman/listinfo/ilugd Next Event: http://freed.in - February 22/23, 2008 Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/[email protected]/
