Here it is. Thanks for looking into it.
zte.bat
cat /proc/bus/usb/devices
modprobe usbserial vendor=0x19d2 product=0xfffd
dmesg
wvdialconf /etc/wvdial.conf
cp wvdial-zte.conf /usr/bin/wvdial.conf
cp wvdial-zte.conf /etc/wvdial.conf
wvdial zte
wvdial-zte.conf
[Dialer zte]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Phone = #777
Username = XXXXXXXXXX
Password = XXXXXXXXXX
ISDN = 0
SetVolume = 0
FlowControl = Hardware (CRTSCTS)
Modem = /dev/ttyUSB0
Dial Command = ATDT
Baud = 460800
Stupid Mode = 1
Regards,
Bala
_______________________________________________
ilugd mailinglist -- [email protected]
http://frodo.hserus.net/mailman/listinfo/ilugd
Next Event: http://freed.in - February 22-24, 2008
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
http://www.mail-archive.com/[email protected]/
