Try settng horizontal and vertical frequencies also,,
use 60Hz refresh rate,, it will sovlve you probem,
Always remember two command
* gnome-display-properties
* system-config-display
Try changing refresh rate to 60Hz,, and press Ctrl+Alt+BackSace
then increase resolution to desired one and then press
Ctrl+Alt+BackSacepress
try these ,, it works,, on "yumraj" based system,
What card do you have??
you are using Vesa driver,,, its a very generic driver,,
try installing driver for your card and change the line
Section "Device"
Identifier "Videocard0"
Driver "vesa"
EndSection
to
Section "Device"
Identifier "Videocard0"
Driver "<ilug-d-driver>"
EndSection
>
> Monitor :15" CRT Samsung Samtron 56v
>
> Thanks
> Lucky
>
> # Xorg configuration created by system-config-display
>
> Section "ServerLayout"
> Identifier "single head configuration"
> Screen 0 "Screen0" 0 0
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> Option "XkbModel" "pc105"
> Option "XkbLayout" "us"
> EndSection
>
> Section "Device"
> Identifier "Videocard0"
> Driver "vesa"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Videocard0"
> DefaultDepth 24
> SubSection "Display"
> Viewport 0 0
> Depth 24
> Modes "1024x768" "800x600" "640x480"
> EndSubSection
> EndSection
>
>
> _______________________________________________
> ilugd mailinglist -- [email protected]
> http://frodo.hserus.net/mailman/listinfo/ilugd
> Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
> http://www.mail-archive.com/[email protected]/
>
>
--
┌───[ Narendra Sisodiya ]──────────────┐
│ │
│ http://narendra.techfandu.org │
│ http://www.lug-iitd.org │
│ │
└────────────[ +91-93790-75930 ]──────┘
_______________________________________________
ilugd mailinglist -- [email protected]
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
http://www.mail-archive.com/[email protected]/
