> you may be knowing this on Seagate SATA drives (Barracuda):
>
> ata2: exception Emask 0x10 SAct 0x0 SErr 0x90202 action 0xe frozen
> [ 116.038145] ata2: irq_stat 0x00400000, PHY RDY changed
> [ 116.038190] ata2: SError: { RecovComm Persist PHYRdyChg 10B8B }
> [ 116.038242] ata2: hard resetting link
> [ 116.916960] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 116.917019] ata2: EH complete
> [ 117.516247] ata2: exception Emask 0x10 SAct 0x0 SErr 0x90202 action
> 0xe frozen
> [ 117.516300] ata2: irq_stat 0x00400000, PHY RDY changed
> [ 117.516345] ata2: SError: { RecovComm Persist PHYRdyChg 10B8B }
> [ 117.516396] ata2: hard resetting link
> [ 118.391380] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>
> .....
>
> What is the correct way to deal with this?
>
> Is the latest kernel OK on this?
> Or is it a firmware problem? ... esp as it is apparently a
> cross-platform problem?
I'd definitely like to know if anyone here has an idea about this. I
got my hard disk changed after I began seeing these errors and
couldn't even boot. Later HP told me my hard disk was going bad. But,
after that I found that people around the web are seeing these errors
on perfectly fine hard disks as well.
Any idea?
pratul
--
Incoming! Freed.in 2009, 20-21 February.
dum vivimus, vivamus.
http://pratul.in
_______________________________________________
ilugd mailinglist -- [email protected]
http://frodo.hserus.net/mailman/listinfo/ilugd
Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi
http://www.mail-archive.com/[email protected]/
