Hi, Have a strange problem. System with 6x750GB SATA drives installed. One failed, so replaced it. Drive is recognised properly at boot time:
SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back SCSI device sdc: 1465149168 512-byte hdwr sectors (750156 MB) sdc: Write Protect is off sdc: Mode Sense: 00 3a 00 00 SCSI device sdc: drive cache: write back sdc:<6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 23 (level, low) -> IRQ 58 However, both parted and fdisk insist on treating the drive as a 50GB drive for some reason: fdisk -l /dev/sdc Disk /dev/sdc: 50.0 GB, 50000000000 bytes 255 heads, 63 sectors/track, 6078 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes parted /dev/sdc GNU Parted 1.7.1 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) mklabel gpt (parted) print Disk /dev/sdc: 50.0GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags Any idea why this could be happening? Regards, -- Raju -- Raj Mathur [EMAIL PROTECTED] http://kandalaya.org/ GPG: 78D4 FC67 367F 40E2 0DD5 0FEF C968 D0EF CC68 D17F PsyTrance & Chill: http://schizoid.in/ || It is the mind that moves _______________________________________________ ilugd mailinglist -- [email protected] http://frodo.hserus.net/mailman/listinfo/ilugd Archives at: http://news.gmane.org/gmane.user-groups.linux.delhi http://www.mail-archive.com/[email protected]/
