Hi, So I did manage getting hold of a spa3102. I've been trying to set it up with FreeSwitch and integrate my PSTN line. After repeated attempts I was getting nowhere when I finally looked at regional settings. I've tried various configs and am now reasonably sure that its an issue with regional settings.
I reset the spa3102 to default settings, and plugged in the PSTN phone line into fxo and an analong phone into fxs. There is no network cable connected and no sort of PBX involved. When I call my PSTN number, the phone at fxs does ring but a call is not being established. If I answer the phone, there is no call established and it disconnects in 2 sec. and I get a disconn tone, while the caller continues to hear the PSTN number ring. Same thing if the call goes unanswered. The PSTN line status on the spa3102 shows Last Call Disconn. reason: CPC Signal. I think I am correct in assuming that there is no point in any further configuration attempts until I manage to get this call established first. Should this plug and play setup be working by default on every spa3102 if regional settings are correct? If that is the case then it mostly seems like an issue with regional settings. I looked at the voxilla forums and other places and tried whatever regional tone settings I could find for India. Nothing has worked so far. When I bring in the PBX into the picture, I have no problem with my phone working as an sip extension doing everything that is configured just as any other softphone would do. The problem is with PSTN and I suspect its regional settings. Where can I find the correct settings? If anybody has this device configured, please drop me a line. Thanks _______________________________________________ Ilugd mailing list [email protected] http://frodo.hserus.net/mailman/listinfo/ilugd
