Dear All,

I have problem with ubuntu 10.04 and 10.10 in laptop Hp Pavilion dv2700.

for past three days, I am installing, re-installing, re-installing . . .

On Tuesday I have installed ubunuu 10.10 with dual boot.

After installed it, it was working properly.

the next day, I can not see the login screen. Its always showing the ubuntu
logo only.

In recovery mode, it says "setting fstab".

My fstab has no problem.

Also I was run the fsck /dev/... [all]


On wednesday again I reinstalled with ubuntu 10.04.

/ on /dev/sda7 , /home on /dev/sda6 and swap on /dev/sda5 with 'ext4' type.

It was working perfectly on that day fully. I mounted USB drive, CD-ROM.

But today when I switch on the system, I got the same problem like ,
'setting fstab'.

I cant login in tty1 and all. i.e. I cant login in anyway.

I was run fsck from live cd and checked the fstab many times. it has no
problem/error.




ubu...@ubuntu:~$ sudo fdisk -l

Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xb759f9a0

   Device Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          13      102400    7  HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2              13        7649    61336576    7  HPFS/NTFS
/dev/sda3            7650       19458    94849025    5  Extended
/dev/sda5           10139       10637     3998720   82  Linux swap / Solaris
/dev/sda6           10637       19458    70849536   83  Linux
/dev/sda7            7650       10139    19998720   83  Linux

Partition table entries are not in disk order
ubu...@ubuntu:~$


ubu...@ubuntu:~$ sudo fsck /dev/sda7
fsck from util-linux-ng 2.17.2
e2fsck 1.41.11 (14-Mar-2010)
/dev/sda7: clean, 162967/1250928 files, 967671/4999680 blocks
ubu...@ubuntu:~$




Now again going to re-install it with 'ext3' type.


I dont know where is the problem.

Either hard disk failure or os cd failure. The thing is, if the os cd has
problem means, how can I do all the works after installed successfully.

Or Laptop itself has problem ... ?

Any suggestions ...



-- 
Regards,
Arulalan.T

Kanchi Linux User Group Rocks !
http://kanchilug.wordpress.com

My Experiments In Linux are here
http://tuxcoder.wordpress.com



-- 
Regards,
Arulalan.T

Kanchi Linux User Group Rocks !
http://kanchilug.wordpress.com

My Experiments In Linux are here
http://tuxcoder.wordpress.com
_______________________________________________
Ilugd mailing list
Ilugd@lists.linux-delhi.org
http://frodo.hserus.net/mailman/listinfo/ilugd

Reply via email to