Hi All,
Please find the help guide of Reliance Data Card on Centos 6
http://www.linuxquestions.org/questions/linux-newbie-8/zte-ac2627-usb-modem-not-working-in-fedora-9-a-795499/
yum install tcl
yum install usb_modeswitch ( Enable rpmforge repo)
# cat /etc/wvdial.conf
[Dialer Defaults]
Modem=/dev/ttyUSB0
Baud=115200
Dial Command = ATDT
Baud=115200
Dial Command = ATDT
init1=ATZ
init2=AT+CRM=1
Flow Control= Hardware (CRTSCTS)
Username = 9310093082
Password = 9310093082
Phone = #777
Stupid Mode = 1
#lsusb
output is
Bus 004 Device 006: ID 19d2:fff5 ONDA Communication S.p.A.
#cat /etc/usb_modeswitch.conf
DefaultVendor= 0x19d2
DefaultProduct= 0xfff5
TargetVendor= 0x19d2
TargetProduct= 0xfff1
MessageEndpoint=0x0a
MessageContent="5553424312345678c00000008000069f030000000000000000000000000000"
#usb_modeswitch -c /etc/usb_modeswitch.conf
#lsusb
output should be
Bus 004 Device 006: ID 19d2:fff1 ONDA Communication S.p.A.
# check modem is found or not
# ls /dev/ttyU*
if output is positive then run the below command
#wvdial
Thanks With Regards
Dhyanendra
9717985652
_______________________________________________
Ilugd mailing list
[email protected]
http://frodo.hserus.net/mailman/listinfo/ilugd
