|
Dear Reinaldo, I thik I have the solution for your problem.
The best, fast and cheap solution for you, is to do all the job in ILWIS,
and to deliver to your customer a copy of ILWIS together with the georreferenced
photos.
So he will be able to use his photo mosaics in a real GIS software and I'm
sure he'll apreciate to use ILWIS much more than AUTOCAD or Maptitude.
ARIEL MERA
> >Dear Ilwis users and coleagues:
>
>
> >We have a very urgent problem to solve. We start
georeferencing and
> >geometrically correcting a bunch of aerophotos
(about 300) with the
> >purpose of create a photo mosaic in
AutoCAD and/or Maptitude. For that reason we
> >will have to convert
all the images to GeoTIF format, at the end of the
> >process.
Yesterday, we reached the mark of 250 photos, and to save time
> >(we
will have to deliver the job finished on Wednesday, that is tomorrow)
started
> >to convert from ILWIS to GeoTIF, and then we have
found that neither
> >AutoCAD nor Maptitude, can open the images, the
message is [Image
> >corrupt], using a generic graphic software like
Corel or PaintBrush, the
> >image came wrong (blue instead of
Grayscale) and with no coordinates. We
> >try to use BMP as
connection format, but then all georeference is lost,
> >the same
happens when using DOS Convert from ILWIS 1.4, this way there
>
>is no corruption of the image, but we lost the Georeference, we do
not have
> >time to Georeference again from the Geometrically
corrected image, exported
> >from Convert 1.41.
>> PLEASE do you have a solution for this? We do
not have time as well to
> >start the whole process from the
begining in other software like ENVI or PCI....
> >
>
>Thanks in advance for your aid. Best regards,
> >
>
>Reinaldo
> >
> >P.S. We have run all the three patches
of version 2.2 with no changes in
> >the results
> >
>
>RPM
|
