On 4/6/02 4:58 am, "Jeremy Derr" <[EMAIL PROTECTED]> wrote:
> On Monday, June 3, 2002, at 10:10 PM, Chuck & Kim Blair wrote: > >> Help! need to connect my imac to my 1400 laptop which has no ethernet >> Any suggestions? Cheap suggestions....can't do the pcmcia ethernet >> insert in the 1400. > > PC Card ethernet is about your cheapest option, really. It's either that, > or a LocalTalk-to-Ethernet bridge like the iPrint or EtherPrint > adapters.... but you'll wind up paying about the same, and wind up with a > much much slower connection. > I agree. I use a Kingston RX 10 base card in mine, it was old stock when I bought it a year ago. You could also have originally bought an internal card whose RJ45 connector is accessed through a removable cover at the rear, might be some used around from scrap PB1400's. If you do buy a 10/100base PCMCIA card, check it not a 32 bit cardbus card, they aren't compatible. Steve Bell -- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
