You may have burnt out the video card on the 400 MHz Board. on 6/7/02 9:12 PM, Derek Scott at [EMAIL PROTECTED] wrote:
> I have a imac 350, and recently i picked up a 400mhz imac motherboard DV and > so i swapped the 350 for the 400 and it worked for a little while, and when > using it i noticed the screen was off center, so while i had it open and me > not knowing about the control in the displays like a doof i turned the > little knob on the high voltage rectifier that said screen and it adjusted > the brightness, so i put it down and then i restarted to X and noticed the > brightness was different than that of 9.2 so i shut down and toyed with the > screen knob some more and then the screen wouldnt turn back on, so i put the > 350 board back in and adjusted the screen to default and it worked > fine,after that i put in the 400 board no longer gives video any more > internally or externally, but i hear it booting because since the clock is > off, it makes a system beep when it gets the desktop as an error so i know > its booting, but i dont understand why theres no video so if anyone has any > ideas besides not trying to upgrade your imac with a different > motherboard(lets not forget i had it working:-) ) or messing with the high > voltage rectifier that would be great! > > -- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
