On 26/7/02 2:53 am, "Carrillo, Jaime" <[EMAIL PROTECTED]> wrote:
> How does one remove the bottom (white) case from the slot-loading iMac DV? > I've removed the screws and the case ALMOST comes off, except for where it's > attached to the front (by the cd slot). I'm afraid of damaging the case, or > breaking the fasteners if I pull case too far back. Does it need to be > forced? > > Thanks. :-) There are 4 screws to remove, 2 short ones by the tilt foot at the front, then 2 long screws under the video connector cover, the outer 2. With the iMac upside down, lift the base from the rear, pulling towards the front. As with yours, some are more securely held at the front. The clips will release with a 'snap', do not worry. Steve Bell -- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> Using a Mac? Free email & more at Applelinks! http://www.applelinks.com
