��������Hi all, �������� ��������I have a Rev A with 8.6 on it and other than a little extra RAM it is box stock. �It and the 840 AV next to it have seen many versions of windows come and go along with some cheap PC hardware that didn't last. �Now after a year of sproadic snapping sounds (electical arcing) it has lapsed into a comma. ��������Actually it will not power up. �I thought the tube would go out because the sounds I had heard led me to imagine little carbon traces running down the sides of the CRT's transformer. �I figured I would have a working computer just no way to easily view the screen. �Nope. �I guess the power supply died. ��������I am writing the list in hopes of finding some real troubleshooting experience. �I checked the small fuse on the power board and have voltage to the board but nothing will run or start. �I recall some discussions about the most common failures of this type but before I spend $100 on a new power board I though I would seek the advice from anyone who has worked on these before.
Thanks..... ��������Mark, -- The iMac List is sponsored by <http://lowendmac.com/> and... Small Dog Electronics http://www.smalldog.com | Refurbished Drives | - Epson Stylus Color 580 Printers - new at $69 | & CDRWs on Sale! | Support Low End Mac <http://lowendmac.com/lists/support.html> iMac List info: <http://lowendmac.com/imac/list.shtml> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/imac-list%40mail.maclaunch.com/> --------------------------------------------------------------- >The Think Different Store http://www.ThinkDifferentStore.com ---------------------------------------------------------------
