Hi Elliott, It did boot up fine with the Airport card installed without the antenna connected. I did try booting the iMac several times with the antenna connected but nothing but the chime sound and no video. Another funny thing was that the iMac did not boot until I put the plastic piece back on the end of the antenna connection after removing the Airport card. I will try the zapping the PRAM. I did not know this still was something you can do. I remember doing that with the older compact Macs. Thanks. Steve
On Oct 19, 11:15 pm, Elliott Price <[email protected]> wrote: > That's very strange; You'll probably have to do some more diagnosing. > Does it still boot with the AirPort installed, but without the antenna > disconnected? Did it only not boot once? You might try it a few times > if it doesn't. One thing about those connectors, make sure they're in > ALL the way, push them a little harder then you'd think you have to. > I've had the trouble with accidentally only plugging them in half of > the way. You might try hooking it all in, then zapping the PRAM. (Hold > Opt+Apple+R+P at startup, wait for 4 chimes) Sometimes this helps with > new hardware problems. > > -Elliott Price > Mac Computer Repair - Santa Barbara > Graphic Design - Artwork Setup > Websites - Low Cost Custom Websites > > On Oct 19, 2009, at 8:47 PM, Wolfman wrote: > > > > > I have a slot load iMac G3 450MHz. I wanted to install an airport > > card and as all of you know I needed an adapter card. I put the > > airport card in the adapter and plugged the card in. The iMac > > recognized the airport card but I could not access the internet > > without using an ethernet connection to my airport base station. > > > I then wondered if there is supposed to be an antenna connected to the > > airport card so I opened the iMac up again to access the card. After > > finding and connecting the buildt in antenna, the iMac would not boot > > up. The iMac chimed but the screen remained blank. > > > I removed the airport card and adapter and the iMac booted up > > normally. Any idea what is going on? Thanks. > > > Steve --~--~---------~--~----~------------~-------~--~----~ You received this message because you are a member of the iMac Group, a group for those using Apple iMacs and eMacs. The list FAQ is at http://lowendmac.com/imac/list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/imaclist -~----------~----~----~----~------~----~------~--~---
