I tried dhclient. No dice. But it recognizes the interface, so whatever is going wrong is either at the OS or the router.
On Dec 9, 6:38 am, Robert Pangrazio <[email protected]> wrote: > i believe its "dhclient" in ubuntu. You'll need to us sudo or su to root. > Check "ifconfig -a". Look for your ethernet port, usually its eth0. It will > tell you if it got an ipaddress/subnet. > > On Sun, Dec 6, 2009 at 10:29 PM, epic93 <[email protected]> wrote: > > > On Dec 6, 5:28 pm, Dan <[email protected]> wrote: > > > At 6:09 PM -0800 12/5/2009, epic93 wrote: > > > > >I have a g3 350mhz imac. I have had it for about a year now running > > > >linux, and just recently (as my emac had gone down) I re installed OS > > > >9. > > > > Mac OS 9.0, 9.1, 9.2, 9.2.1, or 9.2.2? > > 9.0 when I had it > > > > >For some reason, I was not able to get on the network. We have a > > > >lan with a wireless router and I plugged it into an ethernet port on > > > >the router (It has a few on back for a small wired workgroup) I tried > > > >everything I could with the settings for OS 9 > > > > TCP/IP control panel, set it for DHCP. Save the settings. Then > > > either wait up to 5 minutes for the DHCP cycle to trigger or reboot. > > Tried that. It failed. > > > > >and eventually, believing that perhaps Linux was a more network > > > >oriented operating > > > >system, installed kubuntu. This failed to get on the LAN as well > > > > Open Transport uses a port of Mentat/TCP. In its day it was the > > > superior networking stack. As I recall, it even outperformed the > > > implementations in Unix and Linux. > > > > >and now I have no idea what to do. > > > > Check the router's log to see why it's not connecting. > > > Check the log in Linux to see why it's not connecting. > > > > Make sure your router is configured to accept a DHCP client on that > > > ethernet port. > > It is. > > > > >I even tried plugging it into another ethernet switch, which failed > > > >to see it as well. > > > > Perhaps the ethernet port is blown? See if you can start AppleTalk. > > > It won't start if the NIC doesn't talk back correctly. > > When I had OS 9 on it it started. > > Now it seems linux can recognize it, but something isn't right. I'm > > beginning to think this is a software issue, rather than a hardware > > issue. And considering that it used to work on a wired only LAN (with > > an emac on a five port workgroup switch, which went itself into this > > very same router). I'm suspecting something is up with the router or > > my network configurations > > > > Perhaps the ethernet cable is foo? > > tested it. it's good. > > > > - Dan. > > > -- > > > - Psychoceramic Emeritus; South Jersey, USA, Earth. > > > How would I go about configuring DHCP in the terminal? I want to use > > the terminal with linux for speed and fun, no gui, but network > > configuration is one of those things I only learned how to do in the > > GUI. And KDE won't initialize. > > > P.S. I seem to now recall having this work on the LAN before, but I am > > pretty certain that was before we got High speed internet. > > > -- > > You received this message because you are a member of the iMac Group, a > > group for those using Apple iMacs and eMacs. > > The list FAQ is athttp://lowendmac.com/imac/list.shtmland our netiquette > > guide is athttp://www.lowendmac.com/lists/netiquette.shtml > > To post to this group, send email to [email protected] > > To leave this group, send email to > > [email protected]<imaclist%[email protected]> > > For more options, visit this group at > >http://groups.google.com/group/imaclist -- You received this message because you are a member of the iMac Group, a group for those using Apple iMacs and eMacs. The list FAQ is at http://lowendmac.com/imac/list.shtml and our netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml To post to this group, send email to [email protected] To leave this group, send email to [email protected] For more options, visit this group at http://groups.google.com/group/imaclist
