Try building the "Local Address Table", it might be a little large somewhat but hopefully you can utilize the subnet mask features to keep the table size down. If the external domains are using webmail its not a problem, they get authenticated and they are in, if not tell them its a Y2K issue and they must change. Good Luck! At 03:10 PM 7/2/99 -0400, Vaughn Thurman wrote: >try "local users only" for that situation >-V >----- Original Message ----- >From: Ralph Williams <[EMAIL PROTECTED]> >To: <[EMAIL PROTECTED]> >Sent: Friday, July 02, 1999 2:52 PM >Subject: RE: [IMail Forum] Imail 6.0 > > >> OK, so I'm blacklisted by ORBS for having an Open Relay Server. >> >> The question is, what is the best way to set the Relay Options. I >currently >> have it set to Relay for Anyone. >> >> If I set it to Relay Mail For.. and enter all of our IP blocks, how does >> this affect our people whose domains we host. They are using our IP >address, >> but accessing mail in their Domain from an outside IP address. Will I have >> to enter all 300 IP address blocks of the customers outside our domain? >> >> I would appreciate comments as to how others have theirs set. >> >> Ralph Williams >> WCNet >> http://www.wcnet.net >> 409-543-9111 or 800-569-3464 >> >> Please visit http://www.ipswitch.com/support/mailing-lists.html >> to be removed from this list. >> > >Please visit http://www.ipswitch.com/support/mailing-lists.html >to be removed from this list. > > Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list.
