The mail will sit in the spool until the smtp
timer setting is reached. If you have not changed
your settings then they should be 10 tries at 30
minute intervals. Try changing the date stamp on
your files to 31 minutes earlier.
Also the file extensions should be *.smp and
*.smd.
Kurt Haynes
System Administrator
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Beau Smith
Sent: Monday, January 03, 2000 12:27 PM
To: [EMAIL PROTECTED]
Subject: Re: [IMail Forum] Manually constructing messages
Actually, that was a typo I made when recopying it, but in the actual files,
the extension names are correct; I just again verified this, and it still
sits
there. Is there some special naming convention I am missing?
thanks,
beau
David Gregg wrote:
> I believe thyour problem is the filename:
>
> QD:\IMAIL\spool\d1.gsc
>
> Note the extension. Your example data file has a different extension
than
> you are specifying.
>
> -----Original Message-----
> From: Beau Smith <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED] <[EMAIL PROTECTED]>
> Date: Monday, January 03, 2000 9:32 AM
> Subject: [IMail Forum] Manually constructing messages
>
> >Hi,
> >
> >I am using IMail 5.07. I was told that by manually generating two
> >messages in the spool directory, a "Q".SMD file and a corresponding
> >"D".SMD file, I can generate messages from any computers on the LAN,
> >even those without SMTP clients. I can't seem to make this work. The
> >files simply sit in the directory and don't move. Below are the files I
> >created.
> >
> >---Filename: d1.smd-----------------------------------------------
> >
> >Message-Id: <[EMAIL PROTECTED]>
> >Mime-Version: 1.0
> >Content-Type: text/plain; charset=us-ascii
> >From: "Sample Account " <[EMAIL PROTECTED]>
> >To: "Beau " <[EMAIL PROTECTED]>
> >Subject: Manual message from sample account
> >X-Mailer: <MailMyCell v1.0>
> >
> >This is a test message from the sample account.
> >
> >---End file d1.smd-------------------------------------------------
> >
> >---Filename: q1.smd-----------------------------------------------
> >
> >QD:\IMAIL\spool\d1.gsc
> >Hmailmycell.com
> >S<[EMAIL PROTECTED]>
> >R<[EMAIL PROTECTED]>
> >
> >---End file q1.smd-------------------------------------------------
> >
> >
> >If I use IMail1.exe, they get send right out. The above never works. I
> >was going to simply use MS's SMTP service, but I would rather stick with
> >IMail if it can do the job. Any ideas?
> >
> >Thanks,
> >
> >Beau
> >
> >Please visit http://www.ipswitch.com/support/mailing-lists.html
> >to be removed from this list.
> >
>
> Please visit http://www.ipswitch.com/support/mailing-lists.html
> to be removed from this list.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
