You MUST stop and restart the SMTP service for any changes to take effect.
If, after the service restart you still can send with the new Address relay
settings, then I would suggest a restart of the computer. If all this fails,
then you need to re-install IMail (not likely you will get that far!). If
the re-install fixes, then check your HD with your favorite disk scanning
tool.
Daniel Donnelly
Ipswitch Technical Support
________________________________________________________
See our Knowledge Base at http://support.ipswitch.com/kb
----- Original Message -----
From: "Tom Long" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, April 17, 2000 10:37 AM
Subject: [IMail Forum] Relaying
> I have my "relay mail for addresses" set to have all the ip addresses for
> the network, but when I deleted the class that included my machine I could
> still send mail through it. Is there another setting that I must check as
> well. I also have disabled the smtp "auth" reporting, because I am using
> eudora.
>
>
> Tom Long
> Communications Supervisor 1025 Roosevelt Avenue
>
> City of Detroit Lakes Detroit Lakes, MN 56501
>
> [EMAIL PROTECTED] Telephone: 218-846-7142
>
> www.detroitlakes.org Fax: 708-810-3445
> Please visit http://www.ipswitch.com/support/mailing-lists.html
> to be removed from this list.
>
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
