Your use of the 'Addresses' is not correct! If you wish to have a group of
IP (say a class C) allowed to relay, the entry should be 'w.x.y.0' with
subnet mask of '255.255.255.0'. As you have currently set it, only 2 IP are
allowed, 127.0.0.1 and 207.247.24.244!
Daniel Donnelly
Ipswitch Technical Support
________________________________________________________
See our Knowledge Base at http://support.ipswitch.com/kb
----- Original Message -----
From: <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Monday, April 24, 2000 7:46 PM
Subject: [IMail Forum] Smtp stops working for local addresses
> Hi
>
>
> I keep losing smtp to external mail.
>
> I have to change to "Relay any mail" and it works good.
>
> But when I go back to "Relay only mail for local addresses" it stops
> working.
> It has been working great for "Relay only mail for local
> addresses" since I install Imail.
>
> Yesterday I changed to "Relay any mail" I then Stop and Started smtp.
> I then went back to "Relay for local addresses" I then Stop and Started
> smtp. It worked for 1 day.
>
> Now it does not work at all for "Relay for local addresses"
>
>
> Modify SMTP Settings
>
> Queue timer: 30
> Remote mail gateway host:
> Send all remote mail through gateway
> Tries before sending to gateway: 3
> Tries before returning to sender: 10
> Relay any mail
> Relay only mail for local addresses X
>
> Modify Access Table - local
> Address Mask: 127.0.0.1 255.255.255.255
> 207.247.24.244 255.255.255.255
>
> Don't relay any mail
> Allow remote mail to local lists
> Allow remote view of local lists
> Refuse NULL senders X
> Check valid sender format X
> No logging
> Log to syslog.txt X
>
>
>
>
>
> PS- Come by http://florida.com for all your Florida needs!!
> Please visit http://www.ipswitch.com/support/mailing-lists.html
> to be removed from this list.
>
Please visit http://www.ipswitch.com/support/mailing-lists.html
to be removed from this list.
