I appreciate the help. Yeah I will have to set it to
addresses. There would be too much support involved in no relay. I
only have a couple IP ranges to put in so that shouldn’t be that
hard. Now to get off the blacklists…
-----Original Message-----
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Behalf Of Travis Rabe
Sent: Monday, June 16, 2003 12:02
PM
To: [EMAIL PROTECTED]
Subject: RE: [IMail Forum]
Blacklist Help
Sensitivity: Private
John is on the money here.
If you change it to relay for addresses, then you need to put those IP address
in the system, ie 192.168.1.0 255.255.255.0 OR if you change it to No
relay, your users will have to use SMTP Auth with their mail client.
Relay for addresses will require some work on your part. Setting it to No
Relay, will require having all users change their mail client to use SMTP Auth
(and a lot of phone support I imagine). Most mail clients support this
now.
-----Original
Message-----
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]On
Behalf Of John Tolmachoff (Lists)
Sent: Monday, June 16, 2003 10:46
AM
To: [EMAIL PROTECTED]
Subject: RE: [IMail Forum]
Blacklist Help
Sensitivity: Private
YES! You are an open relay!
I hope that got your attention.
If you have your relay set to
local hosts, you are an open relay.
Only viable setting is no relay or
relay for addresses.
This is a FAQ. Please read the
archives and KB and Imail Manual.
John
Tolmachoff MCSE CSSA
Engineer/Consultant
eServices For
You
www.eservicesforyou.com
-----Original Message-----
From:
[EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]
On Behalf Of Shawn Holcombe
Sent: Monday, June 16, 2003 10:32
AM
To: [EMAIL PROTECTED]
Subject: [IMail Forum] Blacklist
Help
Sensitivity: Private
It seems our domain brazoria-county.com
has been put on a blacklist and we are unable to send messages to certain
places. Can this be since we have our relay set to relay for local hosts
only?
![]()
