I didn't see no fair-queue, but I also didn't see fair-queue. I put n fair-queue 64 512 18 - I will see what happens.
Thanks, Travis > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Behalf Of Russ Uhte > (Lists) > Sent: Thursday, February 26, 2004 8:45 AM > To: [EMAIL PROTECTED] > Subject: RE: [IMail Forum] OT: Cisco Router & Bandwidth > > > At 10:34 AM 2/26/2004, Jason wrote: > >Travis, > > > >The reason it doesn't work like your Internet router, is that the "other > >end" of the Inet connection is most likely throttling you down to an > >acceptable limit (via IIS/FTP/ or their routers). What you are > >experiencing between your two offices is a Cisco queueing called FIFO > >(First in/First out) basically. > > FIFO should only be running on his interface if he told it to > explicitly. By default, a T1 interface in a Cisco router will be running > WFQ. If this has been disabled either accidentally or on purpose, you > should see a line on the interface that says no fair-queue. This > may help > you out somewhat. > > -Russ > > >What you will want to do is read up on > >the different queueing options available with a Cisco router. Cisco has > >tons of info on their site/with examples. For example, you can set max > >outbound utilization per session, set queueing priorities via protocol > >(ie. FTP traffic can go unlimited, unless there is http traffic. If > >there is HTTP traffic, the FTP packets drop down in the queue, and the > >HTTP traffic is processed first.) IMO that is the best way to do things > >(if your traffic patterns permit) because you aren't locking a certain > >protocol down to X bandwidth. > > > > > >Jason > > > > > > > >-----Original Message----- > >From: [EMAIL PROTECTED] > >[mailto:[EMAIL PROTECTED] On Behalf Of Travis Rabe > >Sent: Thursday, February 26, 2004 9:21 AM > >To: Imail User Forum > >Subject: [IMail Forum] OT: Cisco Router & Bandwidth > > > > > >I have a T1 connection two offices with a Cisco 2611 on each side. How > >is that one person can max the T1 by copying 1 really large file (500MB) > >but the T1 going to my ISP can handle many transactions like this before > >it maxes. It's as if the largest job gets the bandwidth needed to get > >the job done quickest. Is there a way to limit this so it works like my > >2621 linking to the ISP? > > > > > > > > > >----------------------------- > >Travis Rabe > > > > > >To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html > >List Archive: > >http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ > >Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ > > > > > >To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html > >List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ >Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ >--- >[This E-mail scanned for viruses by Declude Virus] --- [This E-mail scanned for viruses by Declude Virus] To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/ To Unsubscribe: http://www.ipswitch.com/support/mailing-lists.html List Archive: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Knowledge Base/FAQ: http://www.ipswitch.com/support/IMail/
