The  first one is because you are behind a PIX firewall with the fixup enabled for SMTP..This shouldn't be a problem except that any of you users that need to SMTP Authenticate won't be able to as the PIX in this configuration will not allow Extended SMTP commands which include Auth
 
The second is most likely caused by the firewall as well as you are probably in a Nat'd environment. If you want to comply with this portion of the RFC all you need to do is bind the external IP to the NIC on the mail server along with the internal ip's...Do not bind IMail to it though. Keep everything you have the same (if it's working that is)
 
Eric S
 
----- Original Message -----
From: Wolf Tombe
Sent: Sunday, August 08, 2004 8:25 AM
Subject: [IMail Forum] DNSReports Mail server warnings

I�m running iMail 8.12 with multiple mail domains each configured to have its own IP number and each with its own DNS and MX records accordingly.  I preparing to launch these domains soon and while doing DNS and Mail Server testing I find I�m getting the following two �warnings�.  Although neither of these appears critical, I�d prefer to have no warnings if possible.  With this in mind, I�m wondering what iMail settings I should change to resolve these issues.

 

WARNING: One or more of your mail servers may be claiming to be a host other than what it really is (the SMTP greeting should be a 3-digit code, followed by a space or a dash, then the host name). This probably won't cause any harm, but may be a technical violation of RFC821 4.3 (and RFC2821 4.3.1).

mail.proudandout.net claims to be host *******************************2*22************************.

 

 

WARNING: One or more of your mail servers does not accept mail in the domain literal format ([EMAIL PROTECTED]). Mail servers are technically required RFC1123 5.2.17 to accept mail to domain literals for any of its IP addresses. Not accepting domain literals can make it more difficult to test your mail server, and can prevent you from receiving E-mail from people reporting problems with your mail server. However, it is unlikely that any problems will occur if the domain literals are not accepted.

 

mail.proudandout.net's [EMAIL PROTECTED] response:
    >>> RCPT TO:<[EMAIL PROTECTED]>
    <<< 550 not local host [67.101.20.141], not a gateway

 

Any suggestions will be greatly appreciated.

 

Thanks!

Reply via email to