My network works okay under b95 but it doesn't work after update to B97
On B95:
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232 index 1
inet 127.0.0.1 netmask ff000000
e1000g0: flags=201004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4,CoS>
mtu 1500 index 2
inet 10.239.12.36 netmask ffffff00 broadcast 10.239.12.255
ether 0:13:20:f6:a3:af
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu
8252 index 1
inet6 ::1/128
# modinfo | grep e1000g
167 fffffffff7e5d000 2f7e8 223 1 e1000g (Intel PRO/1000 Ethernet 5.2.6)
On B97:
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu
8232 index 1
inet 127.0.0.1 netmask ff000000
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu
8252 index 1
inet6 ::1/128
# ifconfig e1000g0 plumb
ifconfig: cannot open link "e1000g0": No such device or address
# modinfo | grep e1000g
157 fffffffff7d86000 32f88 223 1 e1000g (Intel PRO/1000 Ethernet 5.2.11)
# prtconf -vp
----snip----
Node 0x000008
assigned-addresses:
8200c810.00000000.90500000.00000000.00020000.8200c814.00000000.90520000.00000000.00001000.8100c818.00000000.000020e0.0000000
0.00000020
reg:
0000c800.00000000.00000000.00000000.00000000.0200c810.00000000.00000000.00000000.00020000.0200c814.00000000.00000000.00000000.00001000.0100
c818.00000000.00000000.00000000.00000020
compatible: 'pci8086,10be.8086.0.3' +
'pci8086,10be.8086.0' + 'pci8086,0' + 'pci8086,10be.3' +
'pci8086,10be' + 'pciclass,020000' + 'pciclass,020
0'
model: 'Ethernet controller'
power-consumption: 00000001.00000001
devsel-speed: 00000000
interrupts: 00000001
max-latency: 00000000
min-grant: 00000000
subsystem-vendor-id: 00008086
subsystem-id: 00000000
unit-address: '19'
class-code: 00020000
revision-id: 00000003
vendor-id: 00008086
device-id: 000010be
name: 'pci8086,0
----snip----
# cat /etc/driver_aliases | grep e1000g
e1000g "pci8086,10be"
# rem_drv e1000g
# add_drv -i "pci8086,10be" e1000g
devfsadm: driver failed to attach: e1000g
Warning: Driver (e1000g) successfully added to system but failed to attachlsls
The interesting is, when I copied the driver (e1000g) from b95 to b97, it works.
So I guess the driver is the root cause.
# modinfo | grep e1000g <================B95
167 fffffffff7e5d000 2f7e8 223 1 e1000g (Intel PRO/1000 Ethernet 5.2.6)
# modinfo | grep e1000g <================B97
157 fffffffff7d86000 32f88 223 1 e1000g (Intel PRO/1000 Ethernet 5.2.11)
Thanks,
-Aubrey
_______________________________________________
indiana-discuss mailing list
[email protected]
http://mail.opensolaris.org/mailman/listinfo/indiana-discuss
