wah..klo optionnya pake yg update/insert gmn bos ? soalnya yg sekarang pake optionnya pake yg itu...trus klo pake yg create, berarti pipeline nya cuman dipake sekali yah...klo dipake secara rutin kan ga bisa create lg yah ? atau gmn ?
--- On Tue, 3/8/11, bhakti prabandyo <[email protected]> wrote: From: bhakti prabandyo <[email protected]> Subject: Re: [indopb] pipeline To: [email protected] Date: Tuesday, March 8, 2011, 4:20 AM Yang bikin g bs, mungkin karena option di pipeline adalah 'Replace - drop/add table'. Karena, table dest di drop (delete) dulu.. Kl dest beda, system g menemukan table dest buat di drop.. Barusan nyoba, kalo kita create Table dulu di Databasenya, bisa jalan.. Sent from my BhakBerry® powered by Sinyal Kuat INODSATFrom: Wahyou Poernomo <[email protected]> Sender: [email protected] Date: Tue, 8 Mar 2011 12:01:17 +0800 (SGT)To: <[email protected]>ReplyTo: [email protected] Subject: Re: [indopb] pipeline pake script bos pipeline.start() itu kan klo ga salah antara source tabel dan dest tabel harus sama namanya yah ? --- On Tue, 3/8/11, bhakti prabandyo <[email protected]> wrote: From: bhakti prabandyo <[email protected]> Subject: Re: [indopb] pipeline To: [email protected] Date: Tuesday, March 8, 2011, 3:58 AM Maksudnya? Bukannya pipeline bs spt DTS-nya SQLSerper yah? Sent from my BhakBerry® powered by Sinyal Kuat INODSATFrom: "poer_x3" <[email protected]> Sender: [email protected] Date: Tue, 08 Mar 2011 03:55:23 -0000To: <[email protected]>ReplyTo: [email protected] Subject: [indopb] pipeline akang2 mo nanya nich bisa ga buat pipeline tapi antara source tabel dan destination tabelnya beda ch : source tabel : im_produk dest tabel : im_produk_tmp terima kasih sebelumnya wahyu
