On Tuesday, 30 September 2014 17:19:30 UTC+7, bruno binet wrote: > Hi list, > > I'm using InfluxDB on a raspberry pi (700MHz ARM v6l, 512MB ram shared with > GPU) which boots from a usb stick, and I'd like to customize InfluxDB config > so that it does not eat all ram but still reduce write cycles to disk as much > as possible (so that the usbstick lifetime is not too much harmed). > > InfluxDB will be used as a simple metrics database for a single user: just to > persists some metrics to disk (write rate of 1 value per minute for about 50 > metrics) and do some few queries every now and then. > > So given the fact that loosing about 1 hour of data would be acceptable and > that I'd like InfluxDB not to eat more than 150Mo of ram: What would be the > best config parameters to set in my config.toml? > > Also I don't need the clustering capabilities: can it be disabled? > > > Note that for now I'm using the leveldb storage backend as I was not able to > compile InfluxDB with rocksdb support on the RPI. > > > Thanks for any help, > > Bruno
I have the EXACT same question, but since you've been waiting 2 years for a reply, I guess I shouldn't get my hopes up... -- Remember to include the version number! --- You received this message because you are subscribed to the Google Groups "InfluxData" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/4ef3ce87-a127-4533-8ddf-5a6b184f604e%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
