Op maandag 15 januari 2018 16:46:59 UTC+1 schreef [email protected]: > Hi, > > In my environment I'm planning to monitor up to 1.600 hosts (cpu, memory, > network, disk, etc...) and I'm a little bit worried about the ammount of > space required to store all such ammount of data. > > I have though that an automatic downsampling of data would be a nice > approach. After reading a lot, it looks one can make use of the "continuous > query" feature. Nevertheless, it just applies to one measurement. > > For example "CPU USAGE" > > The first month: 1 point every 20 seconds > The second month: 1 point every minute > The third mohnt: 1 point every hour > and so on... > > (Im pretty sure this is not the best configuration but it is good enought for > make understand myself). > > Is there any global configuration in order to achieve this objective without > doing it point per point? > > Thanks in dvance, > Óscar
I'm Having the same issue. Also looking for a simple way to set the downsampling automatically for all measurements for a single database. -- Remember to include the version number! --- You received this message because you are subscribed to the Google Groups "InfluxData" group. To unsubscribe from this group and stop receiving emails from it, send an email to [email protected]. To post to this group, send email to [email protected]. Visit this group at https://groups.google.com/group/influxdb. To view this discussion on the web visit https://groups.google.com/d/msgid/influxdb/30ab3ffe-e44f-455b-abd2-be0a0747730c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
