On Mar 7, 3:35pm, Brad Robertson wrote:
> Subject: AFS over Fore ATM gear
>
> I'd like to hear about your experiences running AFS over Fore Systems, Inc.
> ATM hardware.
>
> Our cell has three servers (Suns) on ethernet, and I'm trying to get two AFS
> clients (also Suns) working exclusively through their ATM interfaces. The
> clients are using Fore's sbus cards, attached to an ASX-200 switch. The
> ASX-200 connects to an LAX-20, which connects to ethernet.
We run AFS 3.3a here at CTC with a bank of 6 ASX-200s with three AFS servers.
we are soley SGI based with the exception that we are using a SUN Sparc 20 as
an AFS to PC Translator.
> I would be grateful for any advice, pointers, anecdotes, stories, or help you
> may have to offer. Obviously, if I can't get this worked out, I can't put my
> AFS servers on ATM (which seems to be the eventual goal).
Presently AFS does not support dual homed servers. Although I realized that
your servers are not dual homed (ATM and ethernet), are you routing between
subnets? I have had similar problems when routing between networks as well as
subnets.
> Brad Robertson <[EMAIL PROTECTED]>
>-- End of excerpt from Brad Robertson
--
Kirk Kern
Computer Engineer/Systems & Software Associate Manager
Concurrent Technologies Corporation FLR2/C11
E Mail: [EMAIL PROTECTED] Phone: (814) 269-6877
