On Thursday, June 08, 2000 4:59 AM, Sheldon Samuels [SMTP:[EMAIL PROTECTED]]
wrote:
> Well, I now get a different set of errors, although I'm not sure if this is from SSH
>or CVS. Here is what I've done.
>
> 1) I created a batch file (sshx.bat) and placed the proper SSH command inside of
>the batch. The SSH command is as follows:
>
> ssh -v projectname.sourceforge.net -l username
>
> 2) I then set my CVS_RSH=sshx.bat
>
> 3) Now when I run "CVS UPD" I get the following response:
>
> SSH Version 1.2.14 [winnt-4.0-x86], protocol version 1.4.
> Standard version. Does not use RSAREF.
> Pseudo-terminal will not be allocated because stdin is not a terminal.
> ssh_connect: getuid 0 geteuid 0 anon 0
> Connecting to panjasource.sourceforge.net [198.186.203.44] port 22.
> Connection established.
> Remote protocol version 1.5, remote software version 1.2.27
> Waiting for server public key.
> Received server public key (768 bits) and host key (1024 bits).
> Host 'panjasource.sourceforge.net' is known and matches the host key.
> Initializing random; seed file c:\home/.ssh/random_seed
> Encryption type: idea
> Sent encrypted session key.
> Received encrypted confirmation.
> Trying RSA authentication with key 'smskeys'
> Received RSA challenge from server.
> Sending response to host key RSA challenge.
> Remote: RSA authentication accepted.
> RSA authentication accepted by server.
> Requesting shell.
> Entering interactive session.
> -bash: Root: command not found
> -bash: Valid-responses: command not found
> -bash: valid-requests: command not found
>
This may be too late and you may have solved the problem, but aren't the last three
commands part of the pserver protocol?
***************************************************************
Chris Cameron Open Telecommunications NZ Ltd
Senior Solution Architect
[EMAIL PROTECTED] P.O.Box 10-388
+64 4 495 8403 (DDI) The Terrace
fax: +64 4 495 8419 Wellington
cell: +64 21 650 680 New Zealand
Life, don't talk to me about life ....(Marvin - HHGTTG)
