Mike Allen wrote:
Gentlemen:
When I run 'imtest' on my system, I get the following failure: -->: snip <-- S: A01 NO user not found Authentication failed. generic failure Security strength factor: 256
. logout<< manually typed-in because it stalled here.
* BYE LOGOUT received . OK Completed Connection closed.
saslpasswd appears to have the correct user/passwd combo. I don't know what to do next. My system is FreeBSD 5.1 with cyrus-imapd2 port installed(cyrus-imapd version 2.1.15). My configuration file is attached.
Since you don't show which auth mechanism was used (plaintext or shared secret), its hard to help you. If its plaintext, make sure that saslauthd is running (since that is what you have configured for sasl_pwcheck_method) and configured correctly. If its shared secret, make sure that /usr/local/etc/sasldb2 exists, the 'cyrus' uid can read it an the sasldblistusers2 shows an entry for the user you are trying to log in as.
-- Kenneth Murchison Oceana Matrix Ltd. Software Engineer 21 Princeton Place 716-662-8973 x26 Orchard Park, NY 14127 --PGP Public Key-- http://www.oceana.com/~ken/ksm.pgp
