On 05/25 14:42, Barak Korren wrote: > On 25 May 2016 at 12:44, Eyal Edri <[email protected]> wrote: > > OK, > > I suggest to test using a VM with local disk (preferably on a host with SSD > > configured), if its working, > > lets expedite moving all VMs or at least a large amount of VMs to it until > > we see network load reduced. > > > > This is not that easy, oVirt doesn't support mixing local disk and > storage in the same cluster, so we will need to move hosts to a new > cluster for this. > Also we will lose the ability to use templates, or otherwise have to > create the templates on each and every disk. > > The scratch disk is a good solution for this, where you can have the > OS image on the central storage and the ephemeral data on the local > disk. > > WRT to the storage architecture - a single huge (10.9T) ext4 is used > as the FS on top of the DRBD, this is probably not the most efficient > thing one can do (XFS would probably have been better, RAW via iSCSI - > even better).
That was done >3 years ago, xfs was not quite stable and widely used and supported back then. > > I'm guessing that those 10/9TB are not made from a single disk but > with a hardware RAID of some sort. In this case deactivating the > hardware RAID and re-exposing it as multiple separate iSCSI LUNs (That > are then re-joined to a single sotrage domain in oVirt) will enable > different VMs to concurrently work on different disks. This should > lower the per-vm storage latency. That would get rid of the drbd too, it's a totally different setup, from scratch (no nfs either). > > Looking at the storage machine I see strong indication it is IO bound > - the load average is ~12 while there are just 1-5 working processes > and the CPU is ~80% idle and the rest is IO wait. > > Running 'du *' at: > /srv/ovirt_storage/jenkins-dc/658e5b87-1207-4226-9fcc-4e5fa02b86b4/images > one can see that most images are ~40G in size (that is _real_ 40G not > sparse!). This means that despite having most VMs created based on > templates, the VMs are full template copies rather then COW clones. That should not be like that, maybe the templates are wrongly configured? or foreman images? > What this means is that using pools (where all VMs are COW copies of > the single pool template) is expected to significantly reduce the > storage utilization and therefore the IO load on it (the less you > store, the less you need to read back). That should happen too without pools, with normal qcow templates. And in any case, that will not lower the normal io, when not actually creating vms, as any read and write will still hit the disk anyhow, it only alleviates the io when creating new vms. The local disk (scratch disk) is the best option imo, now and for the foreseeable future. > > -- > Barak Korren > [email protected] > RHEV-CI Team > _______________________________________________ > Infra mailing list > [email protected] > http://lists.ovirt.org/mailman/listinfo/infra -- David Caro Red Hat S.L. Continuous Integration Engineer - EMEA ENG Virtualization R&D Tel.: +420 532 294 605 Email: [email protected] IRC: dcaro|dcaroest@{freenode|oftc|redhat} Web: www.redhat.com RHT Global #: 82-62605
signature.asc
Description: PGP signature
_______________________________________________ Infra mailing list [email protected] http://lists.ovirt.org/mailman/listinfo/infra
