---
modules.d/95iscsi/iscsi-netroot.sh | 13 ---
modules.d/95iscsi/iscsiroot | 186 ++++++++++++++++++---------------
modules.d/95iscsi/install | 1 -
modules.d/95iscsi/parse-iscsiroot.sh | 93 ++++++++++++-----
4 files changed, 169 insertions(+), 121 deletions(-)
diff --git a/modules.d/95iscsi/install b/modules.d/95iscsi/install
index cd4a3ca..613c752 100755
--- a/modules.d/95iscsi/install
+++ b/modules.d/95iscsi/install
@@ -4,6 +4,5 @@ inst iscsistart
inst hostname
inst iscsi-iname
inst_hook cmdline 90 "$moddir/parse-iscsiroot.sh"
-inst_hook netroot 90 "$moddir/iscsi-netroot.sh"
inst "$moddir/iscsiroot" "/sbin/iscsiroot"
instmods iscsi_tcp crc32c
diff --git a/modules.d/95iscsi/iscsi-netroot.sh
b/modules.d/95iscsi/iscsi-netroot.sh
deleted file mode 100755
index 4f02239..0000000
--- a/modules.d/95iscsi/iscsi-netroot.sh
+++ /dev/null
@@ -1,13 +0,0 @@
-if [ "$root" = "dhcp" ]; then
- if [ -n "$new_root_path" -a -z "${new_root_path%%iscsi:*}" ]; then
- root="$new_root_path"
- fi
-fi
-
-if [ -z "${root%iscsi:*}" ]; then
- handler=/sbin/iscsiroot
-fi
-
-if getarg iscsiroot >/dev/null; then
- handler=/sbin/iscsiroot
-fi
diff --git a/modules.d/95iscsi/iscsiroot b/modules.d/95iscsi/iscsiroot
index 8e20fda..b042caf 100755
--- a/modules.d/95iscsi/iscsiroot
+++ b/modules.d/95iscsi/iscsiroot
@@ -1,108 +1,124 @@
#!/bin/sh
+#
+# This implementation is incomplete: Discovery mode is not implemented and
+# the argument handling doesn't follow currently agreed formats. This is mainly
+# because rfc4173 does not say anything about iscsi_initiator but open-iscsi's
+# iscsistart needs this.
+#
. /lib/dracut-lib
PATH=$PATH:/sbin:/usr/sbin
-# XXX needs error handling like ifup/dhclient-script
-
if getarg rdnetdebug; then
exec > /tmp/iscsiroot.$1.$$.out
exec 2>> /tmp/iscsiroot.$1.$$.out
set -x
fi
-# read static conf settings
-for conf in conf/conf.d/*; do
- [ -f ${conf} ] && . ${conf}
-done
+# Huh? Empty $1?
+[ -z "$1" ] && exit 1
+
+# Huh? Empty $2?
+[ -z "$2" ] && exit 1
# root is in the form
root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+# or root=iscsi:iscsi_firmware
netif="$1"
root="$2"
+# read static conf settings
+# XXX Where are these from?
+for conf in conf/conf.d/*; do
+ [ -f ${conf} ] && . ${conf}
+done
+
+# If it's not iscsi we don't continue
+[ "${root%%:*}" = "iscsi" ] || exit 1
+
+# XXX modprobe crc32c should go in the cmdline parser, but I haven't yet
+# figured out a way how to check whether this is built-in or not
+modprobe crc32c
-if [ $root = ${root#iscsi:} ]; then
- iroot=$(getarg iscsiroot)
-else
- iroot=${root#iscsi:}
+if getarg iscsi_firmware ; then
+ echo iscsistart -b
+ exit 0
fi
-if getarg iscsi_firmware >/dev/null; then
- modprobe iscsi_tcp
- modprobe crc32c
- iscsistart -b
-else
- # override conf settings by command line options
- arg=$(getarg iscsi_initiator)
- [ -n "$arg" ] && iscsi_initiator=$arg
- arg=$(getarg iscsi_initiator)
- [ -n "$arg" ] && iscsi_target_name=$arg
- arg=$(getarg iscsi_target_ip)
- [ -n "$arg" ] && iscsi_target_ip=$arg
- arg=$(getarg iscsi_target_port)
- [ -n "$arg" ] && iscsi_target_port=$arg
- arg=$(getarg iscsi_target_group)
- [ -n "$arg" ] && iscsi_target_group=$arg
- arg=$(getarg iscsi_username)
- [ -n "$arg" ] && iscsi_username=$arg
- arg=$(getarg iscsi_password)
- [ -n "$arg" ] && iscsi_password=$arg
- arg=$(getarg iscsi_in_username)
- [ -n "$arg" ] && iscsi_in_username=$arg
- arg=$(getarg iscsi_in_password)
- [ -n "$arg" ] && iscsi_in_password=$arg
-
-
- # override conf/commandline options by dhcp root_path
- OLDIFS="$IFS"
- IFS=:
- set $iroot
- iscsi_target_ip=$1; shift
- iscsi_protocol=$1; shift # ignored
- iscsi_target_port=$1; shift
- iscsi_lun=$1; shift
- iscsi_target_name=$*
- IFS="$OLDIFS"
-
- getarg ro && iscsirw=ro
- getarg rw && iscsirw=rw
- fsopts=${fsopts+$fsopts,}${iscsirw}
-
- modprobe iscsi_tcp
- modprobe crc32c
-
- if [ -z $iscsi_initiator ]; then
- [ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi
- [ -f /etc/iscsi/initiatorname.iscsi ] && .
/etc/iscsi/initiatorname.iscsi
- iscsi_initiator=$InitiatorName
- fi
-
- if [ -z $iscsi_target_port ]; then
- iscsi_target_port=3260
- fi
-
- if [ -z $iscsi_target_group ]; then
- iscsi_target_group=1
- fi
-
- if [ -z $iscsi_initiator ]; then
- iscsi_initiator=$(iscsi-iname)
- fi
-
- echo "InitiatorName='$iscsi_initiator'" > /dev/.initiatorname.iscsi
-
- # FIXME $iscsi_lun?? $iscsi_protocol??
-
- iscsistart -i $iscsi_initiator -t $iscsi_target_name \
- -g $iscsi_target_group -a $iscsi_target_ip \
- -p $iscsi_target_port \
- ${iscsi_username+-u $iscsi_username} \
- ${iscsi_password+-w $iscsi_password} \
- ${iscsi_in_username+-U $iscsi_in_username} \
- ${iscsi_in_password+-W $iscsi_in_password}
- # now we have a root filesystem somewhere in /dev/sda*
- # let the normal block handler handle root=
+# override conf settings by command line options
+arg=$(getarg iscsi_initiator)
+[ -n "$arg" ] && iscsi_initiator=$arg
+arg=$(getarg iscsi_target_name)
+[ -n "$arg" ] && iscsi_target_name=$arg
+arg=$(getarg iscsi_target_ip)
+[ -n "$arg" ] && iscsi_target_ip=$arg
+arg=$(getarg iscsi_target_port)
+[ -n "$arg" ] && iscsi_target_port=$arg
+arg=$(getarg iscsi_target_group)
+[ -n "$arg" ] && iscsi_target_group=$arg
+arg=$(getarg iscsi_username)
+[ -n "$arg" ] && iscsi_username=$arg
+arg=$(getarg iscsi_password)
+[ -n "$arg" ] && iscsi_password=$arg
+arg=$(getarg iscsi_in_username)
+[ -n "$arg" ] && iscsi_in_username=$arg
+arg=$(getarg iscsi_in_password)
+[ -n "$arg" ] && iscsi_in_password=$arg
+
+# override conf/commandline options by dhcp root_path
+# FIXME this assumes that all values have been provided
+iroot=$root
+OLDIFS="$IFS"
+IFS=:
+set $iroot
+iscsi_target_ip=$1; shift
+iscsi_protocol=$1; shift # ignored
+iscsi_target_port=$1; shift
+iscsi_lun=$1; shift
+iscsi_target_name=$*
+IFS="$OLDIFS"
+
+# XXX is this needed?
+getarg ro && iscsirw=ro
+getarg rw && iscsirw=rw
+fsopts=${fsopts+$fsopts,}${iscsirw}
+
+if [ -z $iscsi_initiator ]; then
+ # XXX Where are these from?
+ [ -f /etc/initiatorname.iscsi ] && . /etc/initiatorname.iscsi
+ [ -f /etc/iscsi/initiatorname.iscsi ] && . /etc/iscsi/initiatorname.iscsi
+ iscsi_initiator=$InitiatorName
+
+ # XXX rfc3720 says 'SCSI Initiator Name: The iSCSI Initiator Name specifies
+ # the worldwide unique name of the initiator.' Could we use hostname/ip
+ # if missing?
fi
+if [ -z $iscsi_target_port ]; then
+ iscsi_target_port=3260
+fi
+
+if [ -z $iscsi_target_group ]; then
+ iscsi_target_group=1
+fi
+
+if [ -z $iscsi_initiator ]; then
+ # XXX is this correct?
+ iscsi_initiator=$(iscsi-iname)
+fi
+
+echo "InitiatorName='$iscsi_initiator'" > /dev/.initiatorname.iscsi
+
+# FIXME $iscsi_lun?? $iscsi_protocol??
+
+iscsistart -i $iscsi_initiator -t $iscsi_target_name \
+ -g $iscsi_target_group -a $iscsi_target_ip \
+ -p $iscsi_target_port \
+ ${iscsi_username+-u $iscsi_username} \
+ ${iscsi_password+-w $iscsi_password} \
+ ${iscsi_in_username+-U $iscsi_in_username} \
+ ${iscsi_in_password+-W $iscsi_in_password}
+
+# now we have a root filesystem somewhere in /dev/sda*
+# let the normal block handlers should mount root
exit 0
diff --git a/modules.d/95iscsi/parse-iscsiroot.sh
b/modules.d/95iscsi/parse-iscsiroot.sh
index 4115248..1ba4277 100755
--- a/modules.d/95iscsi/parse-iscsiroot.sh
+++ b/modules.d/95iscsi/parse-iscsiroot.sh
@@ -1,32 +1,75 @@
-# XXX actually we could, if we move to root=XXX and netroot=XXX, then
-# you could do root=LABEL=/ iscsiroot=XXX, or netroot=iscsi:XXX
-#
+#!/bin/sh
#
# Preferred format:
-# root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+# root=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+# [root=*]
netroot=iscsi:[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
#
# Legacy formats:
-# iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
-# root=dhcp
iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
-# root=iscsi
iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
-# root=??? iscsi_initiator= iscsi_target_name= iscsi_target_ip=
iscsi_target_port= iscsi_target_group= iscsi_username= iscsi_password=
iscsi_in_username= iscsi_in_password=
-# root=??? iscsi_firmware
-
-case "$root" in
- iscsi|dhcp|'')
- if getarg iscsiroot= > /dev/null; then
- root=iscsi:$(getarg iscsiroot=)
- fi
- ;;
-esac
-
-if [ "${root%%:*}" = "iscsi" ]; then
- # XXX validate options here?
- # XXX generate udev rules?
- rootok=1
- netroot=iscsi
+# [net]root=[iscsi]
iscsiroot=[<servername>]:[<protocol>]:[<port>]:[<LUN>]:<targetname>
+# [net]root=[iscsi] iscsi_firmware
+#
+# root= takes precedence over netroot= if root=iscsi[...]
+#
+
+# Don't continue if root is ok
+[ -n "$rootok" ] && return
+
+# This script is sourced, so root should be set. But let's be paranoid
+[ -z "$root" ] && root=$(getarg root=)
+[ -z "$netroot" ] && netroot=$(getarg netroot=)
+[ -z "$iscsiroot" ] && iscsiroot=$(getarg iscsiroot=)
+[ -z "$iscsi_firmware" ] && getarg iscsi_firmware && iscsi_firmware="1"
+
+[ -n "$iscsiroot" ] && [ -n "$iscsi_firmware" ] && die "Mixing iscsiroot and
iscsi_firmware is dangerous"
+
+# Root takes precedence over netroot
+if [ "${root%%:*}" = "iscsi" ] ; then
+ if [ -n "$netroot" ] ; then
+ echo "Warning: root takes precedence over netroot. Ignoring netroot"
+
+ fi
+ netroot=$root
+fi
+
+# If it's not empty or iscsi we don't continue
+[ -z "$netroot" ] || [ "${netroot%%:*}" = "iscsi" ] || return
+
+if [ -n "$iscsiroot" ] ; then
+ [ -z "$netroot" ] && netroot=$root
+
+ # @deprecated
+ echo "Warning: Argument isciroot is deprecated and might be removed in a
future"
+ echo "release. See http://apps.sourceforge.net/trac/dracut/wiki/commandline
for"
+ echo "more information."
+
+ # Accept iscsiroot argument?
+ [ -z "$netroot" ] || [ "$netroot" = "iscsi" ] || \
+ die "Argument iscsiroot only accepted for empty root= or
[net]root=iscsi"
+
+ # Override root with iscsiroot content?
+ [ -z "$netroot" ] || [ "$netroot" = "iscsi" ] && netroot=iscsi:$iscsiroot
+fi
+
+# iscsi_firmware does not need argument checking
+if [ -n "$iscsi_firmware" ] ; then
+ netroot=${netroot:-iscsi}
fi
-if getarg iscsiroot; then
- netroot=iscsi
+# If it's not iscsi we don't continue
+[ "${netroot%%:*}" = "iscsi" ] || return
+
+# Check required arguments. there's only one, but it's at the end
+if [ -z "$iscsi_firmware" ] ; then
+ case "${netroot##iscsi:*:*:*:*:}" in
+ $netroot|'') die "Argument targetname for iscsiroot is missing";;
+ esac
fi
+
+# ISCSI actually supported?
+[ -e /sys/devices/virtual/iscsi_transport ] || modprobe iscsi_tcp || die "iscsiroot
requested but kernel/initrd does not support iscsi"
+
+# Done, all good!
+rootok=1
+
+# Shut up init error check
+[ -z "$root" ] && root="iscsi"
--
To unsubscribe from this list: send the line "unsubscribe initramfs" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
